With our radical new geometry and the very best kit money can buy fitted to a lightweight but tough carbon frame, the new ONE-SIXTY 10K has nothing to fear from the roughest, toughest tracks and race stages on the planet. Our new FAST kinematic design and full 29er or mixed wheel size setup is paired with top-end RockShox suspension including a burly 170 mm Zeb fork and Super Deluxe shock, both with Flight Attendant smart lockout technology. We also fit a wide-range, top-end SRAM Eagle drivetrain for crisp wireless shifting.
Evolution or revolution? How about both? The 2022 ONE-SIXTY is a radical, all-new design that pushes our hard-hitting enduro platform to new heights. Just as well, because once it’s there it’s ready to rip the longest, toughest descents too. Our new suspension system uses a flexstay design with an adjustable rocker, so whether you choose to run it as a full 29er (162 mm travel) or mixed 29/27.5” setup (171 mm travel), the geometry is preserved. There’s a radically steep 79° seat tube angle for goat-like climbing and slack 64° head angle plus 170 mm fork to deal with downhill trail chaos. New sizing allows riders to run a longer or shorter reach frame independently of their height, while suspension becomes more progressive as you size up, all with long-travel dropper posts. Our WIRE PORT cable routing, reliable threaded bottom bracket plus on-board tool storage round out the package, while carbon frames also offer FidLock magnetic bottle cages.
- Full carbon frame with FAST kinematic suspension and radical new enduro geometry
- Mixed or full 29er wheels with AGILOMETER sizing
- Smart RockShox Flight Attendant suspension
- Top-end SRAM Eagle wireless drivetrain and tough but light Reynolds carbon wheelset
- 230 mm travel-adjustable dropper post
- On-board tool storage and FidLock bottle cage
Awards & Media
- 171mm suspension travel mullet / 162mm suspension travel 29"
- material: carbon
- 29x2.5" max. wheelsize
- 148x12mm axle standard
- BSA bottom bracket standard
- Air
- 170mm suspension travel
- Tapered
- 44mm fork offset
- 29x2.8" max. wheelsize
- electric suspension system
- adjustable low speed compression
- electric suspension system
- 4 piston
- 4 piston
- 203 mm
- 203 mm
- wireless
- T-Type
- 34.9mm diameter
- 0mm setback
- 30-230mm travel seatpost
- V-mount
- incl. MERIDA minitool
- Flattop
- 32 teeth
- 2 guards
- 32 teeth
- 170 mm for
- 10-52 teeth
- 12 speed
- 110x15mm width front hub
- 148x12mm width rear hub
- 28mm inner width
- Centerlock
- Sram XD
- material: carbon
- Tubeless ready (tubeless tape and valves included)
- Lifetime warranty
- rear 27.5" up to Size M, rear 29" L & XL
- 29x2.5"
- fold
- TR DD 3C MaxxGrip
- 27.5x2.4" XS/S/M 29x2.4" L/XL
- fold
- TR DD 3C MaxxTerra
- including removeable lever, 6/4mm allen key
weighed at frame size MID
Frame Size | XShort | Short | Mid | Long | XLong |
Tyre Sizes | 29/27.5" | 29/27.5" | 29/27.5" | 29" | 29" |
ST seat tube [mm] | 400 | 410 | 425 | 445 | 470 |
TT top tube [mm] | 535 | 562 | 589 | 621 | 653 |
CS chain stay length [mm] | 434 | 434 | 434 | 437.5 | 437.5 |
HTA head tube angle [°] | 64 | 64 | 64 | 64 | 64 |
STA seat tube angle [°] | 79 | 79 | 79 | 79 | 79 |
BD bottom bracket drop [mm] | 7 | 7 | 7 | 27.5 | 27.5 |
HT head tube [mm] | 95 | 95 | 95 | 105 | 120 |
FL fork length [mm] | 581 | 581 | 581 | 581 | 581 |
R reach [mm] | 415 | 442 | 470 | 498 | 525 |
S stack [mm] | 615 | 615 | 615 | 625 | 638 |
WB wheel base [mm] | 1188 | 1215 | 1242 | 1275 | 1308 |
SH stand over height [mm] | 727 | 730 | 737 | 736 | 776 |
No. | Item-No. | Name | Info | Pieces | Torque NM |
1 | A2161000217 | MOUNT | for tube/accesoires | 1 | |
2 | A2300000612 | SCREW | M8x1.25 L6mm | 1 | 8~10 |
3 | A2300000471 | BOLT | M6x1 OD10mm L39mm | 1 | 10~12 |
4 | A2294000196 | WASHER | for M6 sunkenhead screw OD16mm | 1 | |
5 | A2298000113 | SCREW | M6x1 L16mm | 2 | 6~8 |
6 | A2292000102 | WASHER | OD19mm ID15mm H0,3mm | 1 | |
7 | A2300000608 | SCREW | M8x1 | 1 | 10~12 |
8 | A2036000025 | MOUNT | for shock without buhsing | 1 | |
9 | A2300000611 | SCREW | M15x1 L18.5mm | 2 | 13~15 |
10 | A2221000033 | BEARING | 6803V-2RS OD26mm ID17mm W5mm | 4 | |
11 | A2294000102 | WASHER | OD21mm ID17.1mm H3mm | 5 | |
12 | A2302000082 | NUT | M15x1 flip chip | 2 | |
13 | A2031000076 | LINK | 1 | ||
14 | A2300000610 | SCREW | M15x1 L16mm | 2 | 13~15 |
15 | A2294000182 | LOCK RING | for bearing | 2 | |
16 | A2300000475 | BOLT | M6x1 OD10/12mm L55mm | 1 | 8~10 |
17 | A2221000032 | BEARING | 6801V-2RS OD21mm ID12mm W5mm | 1 | |
18 | A2221000034 | BEARING | 6800V-2RS OD19mm ID10mm W5mm | 1 | |
19 | A2294000197 | WASHER | for M6 sunkenhead screw OD18.5mm | 1 | |
20 | A2161000161 | COVER | for service opening | 1 | |
21 | A2294000183 | LOCK RING | for protector screw | 1 | |
22 | A2300000559 | SCREW | M5x0.8 L11mm | 1 | 3~5 |
23 | A2294000105 | WASHER | OD17mm ID12.1mm H2mm | 1 | |
24 | A2294000085 | WASHER | OD15.5mm ID10.1mm H2mm | 1 | |
25 | A2143000147 | BLIND PLUG | 2 | ||
26 | A2294000016 | WASHER | OD19mm ID15.1mm H3mm | 1 | |
27 | A2300000484 | SCREW | M4x0.7 L10mm | 1 | 1,5~2 |
28 | A2232000028 | CHAIN GUIDE | for 28T-36T | 1 | |
29 | A2292000106 | WASHER | OD10mm ID6.2mm H0.5mm | 2 | |
30 | A2298000224 | SCREW | M6x1 L16mm | 2 | 6~8 |
31 | A2232000042 | MOUNT | Mount for chain guide | 1 | |
32 | A2292000008 | WASHER | OD10mm ID6.2mm H3mm | 2 | |
33 | A2298000107 | SCREW | M6x1 L12mm | 1 | 6~8 |
34 | A2164000062 | MOUNT | ISCG-05 | 1 | |
35 | A2161000162 | CABLE GUIDE | 1 | ||
36 | A2300000151 | SCREW | M4x0.7 L12mm | 1 | 3~5 |
37 | A2300000598 | BOLT | M6x1 OD15/17mm L55mm | 1 | 8~10 |
38 | A2221000040 | BEARING | 172607V-2RS OD26mm ID17mm W7mm | 1 | |
39 | A2221000043 | BEARING | 3802V-2RS OD24mm ID15mm W7mm | 1 | |
40 | A2300000609 | SCREW | M10x1 L15mm | 1 | 8~10 |
41 | A2300000318 | SCREW | M4x0.7 L12mm | 3 | 3~5 |
42 | A2116000239 | PROTECTOR | 1 | ||
43 | A2158000078 | PROTECTOR | for chain stay | 1 | |
44 | A2311000102 | RD-HANGER | UDH | 1 | |
45 | A2298000223 | SCREW | M6x1 L12mm | 3 | 6~8 |
46 | A2136000076 | MOUNT | PM200 | 1 | |
47 | A2191000188 | HEAD SET | MERIDA/VP-8151 (MH-P16/MH-P16) | 1 | |
48 | A2358000131 | PROTECTOR | for down tube | 1 | |
49 | A2298000024 | SCREW | M5x0.8 L10mm | 2 | 4~6 |
50 | A2362000105 | PROTECTOR | for seat stay | 1 | |
51 | A2002000135 | THRU AXLE | EXPERT TR; L=178.5mm M12x1 TL=13.5mm | 1 |