- material: aluminium
- 700C wheelsize
- 135x9mm axle standard
- external
- max. 504 Wh
- Coil
- 75mm suspension travel
- lockout
- 2 piston
- 2 piston
- 180 mm
- 180 mm
- 30.9mm diameter
- 15mm setback
- 40mm seatpost suspension travel
- V-mount
- incl. MERIDA minitool
- VPE-891
- 38 teeth
- Shimano FC-E8000
- 170 mm-S/M, 175 mm-L
- 11-42 teeth
- 11 speed
- 20mm inner width
- material: aluminium
- 27.5x2.25"
- wire
- reflecting line
- 27.5x2.25"
- wire
- reflecting line
- 100x15mm width front hub
- 32 spoke holes
- Centerlock
- 135x9mm width rear hub
- 36 spoke holes
- Centerlock
- 504Wh
weighed at frame size M without pedals
Frame Size | S | M | L |
Tyre Sizes | 27.5" | 27.5" | 27.5" |
ST seat tube [mm] | 430 | 480 | 530 |
TT top tube [mm] | 588 | 605 | 623 |
CS chain stay length [mm] | 445 | 445 | 445 |
HTA head tube angle [°] | 68.5 | 68.5 | 68.5 |
STA seat tube angle [°] | 73 | 73 | 73 |
BD bottom bracket drop [mm] | 50 | 50 | 50 |
HT head tube [mm] | 170 | 190 | 210 |
FL fork length [mm] | 484 | 484 | 484 |
R reach [mm] | 392 | 403 | 415 |
S stack [mm] | 642 | 661 | 680 |
WB wheel base [mm] | 1114 | 1133 | 1153 |
SH stand over height [mm] | 472 | 465 | 461 |
No. | Item-No. | Name | Info | Pieces | Torque NM |
1 | A2300000228 | SCREW | M4x0.7 L14mm | 2 | 1.5~2 |
2 | A2258000127 | CABLE GUIDE | for right side | 1 | |
3 | A2258000128 | CABLE GUIDE | for left side | 1 | |
4 | A2258000099 | CABLE PLUG | for rear brake and speed sensor | 1 | |
5 | A2311000072 | RD-HANGER | DH-013F | 1 | |
6 | A2300000004 | SCREW | M3x0.5 L6mm | 2 | 2~4 |
7 | A2300000468 | SCREW | M8x1.25 L18.5mm | 3 | 11~12 |
8 | A2300000469 | SCREW | M8x1.25 L23mm | 3 | 11~12 |
9 | A2300000204 | NUT | for fender; M6 | 1 | |
10 | A2300000288 | SCREW | M6x1.0 L18mm | 1 | 10~12 |
HIGHLIGHTS
HFS-hydroforming Prolite 66 triple butted aluminium frame based around fast rolling yet durable 650B wheels and with commuting and leisure riding in mind. A higher front end and a compact geometry make for a more upright and extremely comfortable riding position. Battery positioned extra low for improved handling. Comes equipped with mudguards, rear rack, side stand, lock and lights.
The eSPRESSO CC come fully equipped with fenders, kickstand, carrier and lights. Ready for any outing you can think of.
A centrally positioned low centre of gravity, which has been achieved through the positioning of the battery in the lower position of the downtube as well as the location of the Shimano motors, enables to deliver fantastic riding characteristics in any situation which are extremely important in particular in wave low step through frames which have the tendency to chatter and jitter when power is applied.
The decision to use 650B wheels with 2.25" off-road tread pattern for our CC models is not just a design feature but has more practical reasons. To add big volume tyres to an e-bike provides increased comfort but also extra traction and therefore more safety reserves. Small and even bigger bumps can easily be rolled over, and a big volume tyre provides more puncture protection compared to a narrow one.
We feature internal cable routing on all models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing, whilst the cables are protected from moisture and dirt and gives the bike a cleaner look.
The outstanding frame stiffness has a strong influence on the riding characteristics of wave low step through frames. The tapered head tube, the large tube diameters, the forged motor bracket as well as the 142x12 mm through rear axle all contribute to achieve a safe and precise riding experience.
The Shimano mid-mounted motor, in combination with the forged motor bracket provides one of the lowest step-through heights in the market.