ONE-TWENTY RC XT-EDITION

ONE-TWENTY RC XT-EDITION

 

Fast, capable, balanced and equipped with a proven Shimano XT drivetrain, our RC XT EDITION takes its inspiration from the test-winning 'classic' ONE-TWENTY but reduces the travel to make it even more efficient.

You are looking for trail-proven geometry and riding position, but if you don't need the 120 mm rear travel our 'classic' ONE-TWENTY brings to the table, then our XT-equipped ONE-TWENTY RC XT EDITION might be the right choice for you. The XT EDITION offers buttery smooth shifting, covers ground super efficiently, and shows off its trail heritage when the trails get more demanding.

Completely redesigned for 2019, the ONE-TWENTY continues its success story into the 2022 season. With multiple test successes, including a 'BEST IN TEST' in Enduro Mountainbike Magazine for the 2020 ONE-TWENTY 8000, our mid-travel bike will once again impress with its versatility and unstoppable trail munching capabilities. While very much a trail bike at heart, the modern yet balanced trail bike geometry, paired with fantastic frame stiffness, created a mid-travel bike that is super capable on rough trails but also carries speed perfectly on less technically demanding tracks. And to give riders a maximum choice, we will offer the ONE-TWENTY again in the 'classic' 120 mm rear/130 mm front travel configuration or the slightly more XC biased 100 mm rear/120 mm front travel 'RC' setup, which also has a slightly steeper head angle and seat angle for improved climbing performance.

  • Triple butted aluminium frame with race (RC) orientated geometry
  • 100 mm FLOAT LINK activated rear wheel travel
  • 120 mm fork travel
  • Lockout front and rear plus dropper seatpost
  • Shimano XT single chainring drivetrain
  • 29er wheels with fast rolling Maxxis Rekon Race tyres
  • 100mm suspension travel
  • material: aluminium
  • 29 wheelsize
  • 148x12mm axle standard
  • BB92 bottom bracket standard
frame size S, M, L, XL
color SILK DARK SILVER (BLACK)
  • Air
  • 120mm suspension travel
  • Tapered
  • remote lockout
  • 51mm fork offset
headset FSA NO.47/50
  • material: aluminium
  • 740mm width
  • flat
  • material: aluminium
  • 31.8mm diameter
  • 7° stem angle
  • 70 mm
grip Rock Shox TwistLoc grip
  • 30.9mm diameter
  • 0mm setback
  • S: 100mm travel seatpost - M: 125mm travel seatpost - L/XL: 150mm travel seatpost
  • V-mount
  • incl. MERIDA minitool
bottom bracket Shimano MT500-PA pressfit
chain KMC X12
  • 32 teeth
  • 170 mm-S, 175 mm-M up
  • 10-51 teeth
  • 12 speed
  • 29x2.35"
  • fold
  • TR EXO
  • 29x2.35"
  • fold
  • TR EXO
  • including removeable lever, 6/4mm allen key
Bike Frame Geometry Image
Frame Size S M L XL
Tire Sizes 29" 29" 29" 29"
St Seat Tubes Mm 400 440 480 520
Tt Top Tubes Mm 571 591 613 635.5
Cs Chain Stays Mm 435 435 435 435
Hta Head Tube Angles Deg 67.8 67.8 67.8 67.8
Sta Seat Tube Angle Deg 76 76 76 76
Bd Bottom Bracket Drops Mm 44 44 44 44
Ht Head Tube Lengths Mm 95 95 105 115
Fl Fork Lengths Mm 531 531 531 531
R Reachs Mm 420 440 460 480
S Stacks Mm 604 604 613 622
Wb Wheel Base Mm 1137 1157 1181 1205
Sh Stand Over Height Mm 703 725 755 783

Technologies

IMAGE
Back to overview

PROLITE 66 TRIPLE BUTTED ALUMINUM

When creating high-end aluminium frames, we use our proven PROLITE 66 (6066) aluminium, as it is incredibly light and durable. In addition, it works exceptionally well with our hydroforming technology, allowing us to create complex shapes, featuring triple butted wall thicknesses, an almost carbon-like appearance and the best possible stiffness-to-weight ratio. While lesser alloys might be cheaper, it is the ideal choice for high-performance bicycle frames.

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

DOWN TUBE EXIT

DOWN TUBE EXIT is a feature seen on some of our frames with internally routed cables. By slightly overlapping the downtube where it connects to the bottom bracket, it leaves a small space that allows cables to exit easily. This means they are easily accessible for routine maintenance or replacement, but it prevents excessive movement and noise that can cause wear and distraction.

Watch Video
IMAGE
Back to overview

SMART ENTRY

Many of our frames offer internal cable routing, where the gear and brake cables are run through the frame for maximum protection and a clean look. Some internally run cables can rattle when riding over uneven surfaces, but our SMART ENTRY system prevents this from happening. Cables, housings and brake hoses are clamped under tension to prevent noisy cable movement. All inlets are completely interchangeable to deal with any kind of cable or wire.

Watch Video
IMAGE
Back to overview

DI2 READY

Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

Watch Video
IMAGE
Back to overview

FLOAT LINK REAR SUSPENSION

A suspension system where the lower shock mount moves as well as the upper link, giving a supple and sensitive feel over bumps. This system allows our engineers to precisely manipulate the leverage ratio, giving ultimate control of the progression of the suspension so that a FLOAT LINK rear suspension system feels like it offers more wheel travel than the numbers alone suggest.

IMAGE
Back to overview

NON-SLIP TIGHTENING

This system means you only need a single tool to tighten important bolts, making it easy to secure them while out on the trail and also making routine maintenance faster and simpler. The bolts have a specially shaped head on one end that fits into a matching recess in the frame, preventing rotation. That means there is no hardware bonded into the frame itself, so damaged threads or bolts can be easily replaced.

Watch Video