Big Ninety-Nine 1000
|Frame||Big Ninety-Nine Comp-Single R12|
|포크||Manitou Marvel Comp 29 TS Air 120 taper|
|서스펜션||Fox Float CTD SV BV - Perf.|
|앞 디레일러||Shimano SLX HD triple|
|뒷 디레일러||Shimano Deore XT Shadow+|
|Shifters||Shimano SLX ispec|
|Brakes||Shimano M615 180 mm Disc|
|체인링||Shimano M622 40-30-22|
|체인||KMC X10 10s|
|Hubs||attached / 12 mm Thru axle|
|림||Mavic CrossRide Disc 29 FQR-R12|
|프리휠||Sram PG1070 11-36|
|타이어||Maxxis CrossMark 29er 2.1 fold|
|핸들바 스템||Merida Pro K OS -16°AD|
|핸들바||Merida Pro OS 680 Flat|
|헤드셋||Big Conoid A-Bearing|
|싯 포스트||Merida Pro H SB0 31.6 mm|
|안장||ProLogo Kappa Evo|
|Head Tube Angle||69||69.5||69.5||70||70|
|Seat Tube Angle||73||73||73||73||73|
|Bottom Bracket Drop||26.5||26.5||26.5||27||27|
|Head Tube Length||95||100||110||120||140|
The best of two worlds: externally shaped head tube with bigger diameter at the bottom and weight saving smaller diameter at the top. ‘X-Taper Headtubes’ always come with tapered forks or correct adapters fitted. Result: superb stiffness and precise steering even in the toughest conditions without increasing the weight of the frame unnecessarily.
This torsion-resistant thru axle with a diameter of 12 mm is used for broad 142 mm rear stays. It delights with perceptible increase of stiffness, tool-free wheel mounting and an always ideal brake rotor position.
The friction-free alignment of the brake calliper is considerably eased by direct mounting of the post-mount calliper at the rear dropout. Adaptable to different brake disc sizes thanks to the utilization of differently dimensioned adapters.
The performance of fullsuspension MTB chassis changes with the frame size? Not at MERIDA – due to the “M.O.R.E Suspension” technology (“MERIDA Optimized Ride Engineering”)! Up to 120 mm travel, this concept marks all of our fullies designed as supported single-pivot constructions. Impressive result: Equally brilliant kinematics and drivetrain-neutrality in all frame sizes.
The mechanical TFS process works from the outside to the inside. In contrast, the complex Hydroforming concept shapes the frame by pushing hot oil under hydraulic high pressure from the inside to the outside. Material: Prolite 66 aluminium.
MERIDA’s premium alloy represents extremely durable and light aluminium of high-end quality. Triple-butted wall thicknesses result not only in exciting frame designs: First of all, they offer an optimum Stiffness-to-Weight (STW) ratio.
The suspension fork and/or the shock unit of your MERIDA bike can be locked directly by moving a lever. This provides an optimum setup e. g. for rides on bumpy surfaces or for powerful sprints – not only during steeper uphill passages!