Big.Seven CF XT-Edition
|Frame||Big.Seven Carbon Comp R12|
|포크||Fox 32 Float 650B CTD Remote ready O/C (1.5T) - Evo 100|
|앞 디레일러||Shimano Deore XT HD triple|
|뒷 디레일러||Shimano Deore XT Shadow|
|Shifters||Shimano Deore XT ispec|
|Brakes||Shimano M675 180 mm Cen / Shimano M675 160 mm Cen w/connect|
|체인링||Shimano Deore XT 40-30-22|
|체인||KMC X10 10s|
|Hubs||Shimano Deore Cen / Shimano SLX-12 Cen|
|림||Merida Big.Seven Pro D|
|프리휠||Shimano CS-HG-10 11-36|
|타이어||Schwalbe Racing Ralph 27 Perf. 2.1 fold|
|핸들바 스템||Merida Pro Carbon 5°|
|핸들바||Merida Pro OS 660 R12|
|헤드셋||Big Conoid A-Bearing Neck|
|싯 포스트||Merida Carbon H SB0 27.2 mm|
|안장||Selle Italia X1|
|Head Tube Angle||70.5||71||71||71||71.5|
|Seat Tube Angle||73.5||73||73||73||73|
|Bottom Bracket Drop||45||45||45||45||45|
|Head Tube Length||100||107||117||125||125|
The best of two worlds: externally shaped head tube with bigger diameter at the bottom and weight saving smaller diameter at the top. ‘X-Taper Headtubes’ always come with tapered forks or correct adapters fitted. Result: superb stiffness and precise steering even in the toughest conditions without increasing the weight of the frame unnecessarily.
Using nature as a role model, MERIDA refines the construction of different carbon components successfully with special bio flax fibres which impress particularly with one interesting feature: highly effective vibration damping. Like rigid carbon forks, the rearstays of road bikes or MTB hardtails turn into genuine comfort wonders when these natural fibres are woven into the per se torsion-resistant carbon matrix.
Road bikes and MTB hardtails lack a suspension system at the rear. In this way, they do not only reach their low weight but turn each pilot-provided watt into propulsion. Yet a rigid rearstay transmits any shocks directly to the rider as well – this affects the athlete’s performance potential. But not in the case of our “Flex Stay” seat and chain stays: Their special design absorbs surface bumps and reduces occurring vibrations.
Elaborately shaped frame designs with special inlets and outlets for internally routed brake and/or shifter cables. “Clean” in a double sense: The bike looks uncluttered while the cables are protected effectively from moisture and dirt.
The friction-free alignment of the brake calliper is considerably eased by direct mounting of the post-mount calliper at the rear dropout. Adaptable to different brake disc sizes thanks to the utilization of differently dimensioned adapters.
The suspension fork and/or the shock unit of your MERIDA bike can be locked comfortably from the handlebar via remote lockout. An ideal feature especially for (racing) bikers who require super-fast switching between open and locked mode.
This torsion-resistant thru axle with a diameter of 12 mm is used for broad 142 mm rear stays. It delights with perceptible increase of stiffness, tool-free wheel mounting and an always ideal brake rotor position.