|Gabel||Manitou Machete 29 boost 100 air|
|Federbein||Rock Shox Monarch RT-D2|
|Schaltwerk||Shimano Deore Shadow+|
|Kurbelgarnitur||Shimano 38 DCG|
|Hubs||Shimano Deore boost cen|
|Felge||MERIDA Big Nine comp CC|
|Kassette||Shimano CS-HG50-10 11-36|
|Reifen||Maxxis Ikon 29 2.2 fold + EXO Protection|
|Vorbau||MERIDA Expert OS +6|
|Lenker||MERIDA EXPERT OS 720 R10|
|Sattelstütze||MERIDA Expert H SB15 30.9|
|Sattel||MERIDA Sport 5|
|Pedale||XC pro alloy|
|Batterie||Shimano E8010 500Wh|
|Computer||Shimano Cyclo display SC-E6010|
|Kickstand||Stylo HV Urban|
|Head Tube Angle||68||68||68||68|
|Seat Tube Angle||74||74||74||74|
|Bottom Bracket Drop||40||40||40||40|
|Head Tube Length||110||115||125||135|
|Stand Over Height||720||755||790||823|
The best of two worlds: externally shaped head tube with bigger diameter at the bottom and weight saving smaller diameter at the top. ‘X-Taper Headtubes’ always come with tapered forks or correct adapters fitted. Result: superb stiffness and precise steering even in the toughest conditions without increasing the weight of the frame unnecessarily.
A bike can be so much: Leisure partner, sports equipment, simple way of transport…and all these have in common that you might need to carry something. Let it be the briefcase on the way to the office, the daily shop or maybe even your kids on a suitable child seat. The requirement for all of these is a rear rack - MERIDA bikes with a ‘C-Mount’ have fittings for a rear carrier (some of our models require model specific rear carriers) already integrated, making adding one super fast and simple.
The nicer the weather the more fun you have riding your bike and vice versa. This simple formula stays true till a nice looking and technically well functioning solution for integrating mud guards on your bike is found. MERIDA bikes with ‘F-Mount’ have fittings for mud guards (some of our models require model specific mud guards) already integrated, making adding them super fast and simple.
Due to the widening of the hub spacing by 6mm, the spoke angles become flatter resulting in a stiffer and stronger wheel. In particular on 29er and 650b+ wheels, and paired with the stiffness increasing attributes of a through axle, this is hugely desirable. Besides that, the wider hubs and cranks with wider bottom brackets push the chain line further outwards and enable extra short chain stays for a more agile geometry.
Internal cable routing perfected: Up to this point, the routing of cables inside frame tubes often had the unwanted side effect that they were able to move and produce noise. Our ‘Smart Entry’ allows the cables to be clamped under tension, resulting in rattle free cables even when it is getting rough. All cable inlets are completely interchangeable to deal with any kind of set up; Di2, hydraulic hoses, brake and gear cable housings etc.
Like WorldTour pro riders, more and more technology-loving road riders trust in Shimano’s electronic Di2 shifting system, which is characterized by high reliability and efficient, effortless operability. Bikes/frames with the symbol “Di2 Ready” are optimally prepared for the installation of this technology – especially with a battery mounting possibility below the chain stay or in the seat post.
“Chain Stay Post Mount Disc” – this technology is the result of three findings. First, a brake mount positioned within the frame triangle optimally protects the brake from external influences. Second, the caliper is supported by the chain stay and is therefore able to distribute the occurring physical forces in an ideal way. Third, internally routed cables can reach the brake neatly from the chain stay.
Specifically designed brake disc dropout at aluminium frames with inte- grated mounting possibility for HEBIE rear stay kickstands. For optimum torsion stiffness also during tough braking – a perceptible safety plus!
Elaborately shaped frame designs with special inlets and outlets for internally routed brake and/or shifter cables. “Clean” in a double sense: The bike looks uncluttered while the cables are protected effectively from moisture and dirt.
Besides top functionality, MERIDA frames also have to offer a convincing visual appearance. The second welding process during Smooth Welding evens the connecting welding seam – an elaborate concept for a brilliant look without compromises to stability.
MERIDA’s premium alloy represents extremely durable and light aluminium of high-end quality. Triple-butted wall thicknesses result not only in exciting frame designs: First of all, they offer an optimum Stiffness-to-Weight (STW) ratio.
The mechanical TFS process works from the outside to the inside. In contrast, the complex Hydroforming concept shapes the frame by pushing hot oil under hydraulic high pressure from the inside to the outside. Material: Prolite 66 aluminium.
The suspension fork and/or the shock unit of your MERIDA bike can be locked comfortably from the handlebar via remote lockout. An ideal feature especially for (racing) bikers who require super-fast switching between open and locked mode.
Finden Sie Ihren Händler einfach und bequem
über PLZ, Ort oder den Firmennamen.