|Gabel||Rock Shox Pike RC Air 15 130|
|Federbein||Rock Shox Monarch RT3|
|Schaltwerk||Sram X01 EAGLE 12S|
|Shifters||Sram X01 eagle|
|Bremshebel||Sram Guide RS|
|Brakes||Sram Guide RS 180 PM|
|Kurbelgarnitur||Sram DESCENDANT CARBON EAGLE 32T(27.5") / 30T(29")|
|Kette||Sram X01 EAGLE|
|Felge||DT Swiss E 1700 SPLINE TWO 25 FW IS|
|Kassette||Sram X01 EAGLE 10-50T|
|Reifen||Continental Mountain King II 2.4 ProTection|
|Vorbau||MERIDA Expert TR 35|
|Lenker||MERIDA EXPERT 35 760|
|Steuersatz||Big Conoid S-bearing|
|Sattelstütze||Rock Shox Reverb Stealth 31.6|
|Sattel||Prologo Nago Evo X15|
|Head Tube Angle||68||68||68||69||69||69|
|Seat Tube Angle||74.5||74.5||74.5||75||75||75|
|Bottom Bracket Drop||25||25||25||40||40||40|
|Head Tube Length||105||110||120||95||105||115|
|Stand Over Height||710||732||756||740||768||773|
The best of two worlds: externally shaped head tube with bigger diameter at the bottom and weight saving smaller diameter at the top. ‘X-Taper Headtubes’ always come with tapered forks or correct adapters fitted. Result: superb stiffness and precise steering even in the toughest conditions without increasing the weight of the frame unnecessarily.
Internal cable routing perfected: Up to this point, the routing of cables inside frame tubes often had the unwanted side effect that they were able to move and produce noise. Our ‘Smart Entry’ allows the cables to be clamped under tension, resulting in rattle free cables even when it is getting rough. All cable inlets are completely interchangeable to deal with any kind of set up; Di2, hydraulic hoses, brake and gear cable housings etc.
Thru-axles at the front and/or rear wheel offer various advantages: besides their high torsional stiffness, they especially ensure easy wheel installation and also guarantee an always correct position of the brake rotor. Because in contrast to quick-release solutions, the position of the wheel is always 100 percent the same. MERIDA trusts in 12 mm thru-axles in the rear and 15 mm versions in the front.
Like WorldTour pro riders, more and more technology-loving road riders trust in Shimano’s electronic Di2 shifting system, which is characterized by high reliability and efficient, effortless operability. Bikes/frames with the symbol “Di2 Ready” are optimally prepared for the installation of this technology – especially with a battery mounting possibility below the chain stay or in the seat post.
Due to a large cable exit in the down tube, “Down Tube Exit” additionally puts an end to awkward handling of internally routed cables.
This rear end construction features a “floating” shock: The lower mount moves together with the system and offers very sensitive response characteristics. In addition, engineers are able to influence transmission ratio and progression in an optimal way. In practice, a “Float Link” rear end feels like having more travel than it actually does. Finally, the omission of the shock mount in the main frame provides a clean look.
Anti Wrinkle System – Due to its technological characteristics, carbon provides designers and developers with many excellent possibilities which are not offered by other raw materials used for bike building (e. g. aluminium). The special surface structure is particularly fascinating – but what does happen inside the frame? MERIDA utilizes specific mould inserts which reduce the wrinkling considerably. Result: More stiffness and durability but less weight.
Elaborately shaped frame designs with special inlets and outlets for internally routed brake and/or shifter cables. “Clean” in a double sense: The bike looks uncluttered while the cables are protected effectively from moisture and dirt.
Besides top functionality, MERIDA frames also have to offer a convincing visual appearance. The second welding process during Smooth Welding evens the connecting welding seam – an elaborate concept for a brilliant look without compromises to stability.
The suspension fork and/or the shock unit of your MERIDA bike can be locked directly by moving a lever. This provides an optimum setup e. g. for rides on bumpy surfaces or for powerful sprints – not only during steeper uphill passages!
MERIDA’s premium alloy represents extremely durable and light aluminium of high-end quality. Triple-butted wall thicknesses result not only in exciting frame designs: First of all, they offer an optimum Stiffness-to-Weight (STW) ratio.
The mechanical TFS process works from the outside to the inside. In contrast, the complex Hydroforming concept shapes the frame by pushing hot oil under hydraulic high pressure from the inside to the outside. Material: Prolite 66 aluminium.
The friction-free alignment of the brake calliper is considerably eased by direct mounting of the post-mount calliper at the rear dropout. Adaptable to different brake disc sizes thanks to the utilization of differently dimensioned adapters.
Carbon bikes are often subject to considerable strain. To increase the quality of the used material, MERIDA utilizes this premium technology: The carbon mats are enriched with special nanoparticles which strengthen the matrix of the epoxy resin. In this way, the impact resistance of the final component construction can be increased successfully by up to 40 %. “Nano Matrix Carbon” refines all MERIDA high-end bikes of Model Year 2014.
Finden Sie Ihren Händler einfach und bequem
über PLZ, Ort oder den Firmennamen.