ONE-SIXTY 7. 900
|Fork||FOX 36 FLOAT Performance Elite|
|Shock||Rock Shox Monarch RC3 plus|
|Derailleur Rear||Sram XO1 11s|
|Shifters||SL TRIGGER XO1 11SPD|
|Brakes||Sram Guide R 200 / Sram Guide R 180|
|Chainwheel||Sram X1 1400 32T (BSA)|
|Chainguard||MRP 1X G3 upper|
|Hubs||Sram MTH 716 100x15 / Sram MTH 746 XD 12x142|
|Rim||SunRingle Helix TR27 valve+sealing|
|Freewheel||XG 1175 10-42|
|Tires||Schwalbe Magic Marry 2.35 TSC 27 / Schwalbe Hans Dampf 2.35 TSC 27|
|Handlebar Stem||FSA Grid 35|
|Handlebar||FSA Grid 760|
|Seat Post||Rock Shox Reverb Stealth 31.6|
|Saddle||Prologo Nago Evo X15|
|Top Tube (TT)||571||604||633||660|
|Seat Tube (ST)||380||432||482||530|
|Chain Stays (CS)||440||440||440||440|
|Head Tube Angle (HTA)||66||66||66||66|
|Seat Tube Angle (STA)||74||74||74||74|
|Bottom Bracket Drop (BD)||7||7||7||7|
|Head Tube (HT)||110||120||135||145|
|Fork Length (FO)||552||552||552||552|
|Wheel Base (WB)||1143||1177||1208||1237|
|Stand Over Height (SH)||699||707||743||778|
External butted head-tube with huge dimensioned 1.5” lower head-set and matching taper-steerer fork.
Due to a large cable exit in the down tube, “Down Tube Exit” additionally puts an end to awkward handling of internally routed cables.
Rear suspension often causes problems with the rear shifting cable (e.g. formation of loops, abrasion/friction, undesired shifting) which are caused by movement during compression. Thanks to a double break via special sleeves (“Double Stop”), MERIDA keeps the defined cable length constant.
MERIDA’s original rear stay system characterizes all full-suspension bikes of the 140, 160 and 180 mm category. Due to the virtual pivot, VPK offers outstanding sensitivity in combination with optimum drivetrain and braking neutrality.
Brake or shifting-cables routed internally through the frame’s tubes. Clean and improved outlook, wi
Smoothened welding line by using specific welding technology - improved outlook, without any weakening of the welding structure.
MERIDA's Top-Alloy made of 6066 high-strength aluminum, with triple butted walls.
Through an delicate, hydraulic forced forming process 3-dimensional shaped tubes made of Prolite 66
Direct assembling of the disc-caliper at the frame’s rear drop-out – simplified adjustment of the caliper.
Device to lock the suspension (fork and/or rear-shock) through switching a cable actuated lever, being mounted at the handlebar.
12mm thru-axle with 142 drop-out width: Increased stiffness and perfect disc-rotor position, no tools required for wheel disassembling.