frame size 11.5"
  • Coil
  • 100mm suspension travel
  • Lockout
derailleur front Shimano FD-M310
derailleur rear Shimano RD-M370
shifter front Shimano ST-M370
shifter rear Shimano ST-M370
brake lever Shimano ST-M370
brake front Jack JAK-8 mechanical 160
brake rear Jack JAK-8 mechanical 160
chain KMC M99
  • 100x9mm width front hub
  • 24 spoke holes
  • 6 bolt
  • 135x9mm width rear hub
  • 24 spoke holes
  • 6 bolt
  • 11-32 teeth
  • 9 speed
  • 26x1.95"
  • wire bead
  • 26x1.95"
  • wire bead
spokes Black steel
  • 31.8mm diameter
  • 6° stem angle
  • 620mm width
  • 25mm rise
headset MERIDA M2346 Neck15
  • 27.2mm diameter
  • 15mm setback
saddle MERIDA Junior Comfort

weighed at medium size

Bike Frame Geometry Image
Frame Size 11.5"
Tire Sizes 26"
Frame Size Inch 11.5
Frame Size CM 34
ST seat tube [mm] 343
TT top tube [mm] 555
CS chain stay length [mm] 430
HTA head tube angle [°] 70.5
STA seat tube angle [°] 73.5
BD bottom bracked drop [mm] 45
HT head tube [mm] 95
FL fork length [mm] 490
R reach [mm] 383
S stack [mm] 582
WB wheel base [mm] 1045
SH stand over height [mm] 644(26)
Body Height Cm 140 - 165


Durable aluminium frame with internal cable routing and replaceable dropout hanger. Able to take 26" or 650B wheels. Equipped with mounts for rack, mudguards and kickstand.

These models are built around a very small adult frame with 26" wheels. As the child grows, the wheels can be swapped for 650B wheels, meaning the bike will fit your child for longer.

Many of our bikes feature rigid forks. This helps to keep the weight down, which is a big advantage for much lighter riders. Gears are also kept to a minimum, avoiding confusion for young riders, again reducing weight.

All kids’ bike frames are made with the same 6061 lightweight aluminium we use in our adult bikes, we don’t cut any corners. They’re also painted and lacquered in the same way, so the bikes can still look great even after a few tough knocks.




We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.