eBIG.SEVEN 300 SE

Find Dealer
  • *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

    • material: aluminium
    • 27.5x2.25" max. wheelsize
    • 148x12mm axle standard
    • external
    • max. 504 Wh
    frame size XS, S, M
    color SILK BRONZE (BLACK)
    • Coil
    • 100mm
    • Tapered
    • 47mm fork offset
    • 27.5x2.2" max wheelsize
    display Shimano SC-E5000
    battery lock Abus key
    battery Shimano E8010 504Wh
    derailleur (r) Shimano Deore RDM592 9
    shifter rear Shimano Alivio M3100 9
    • 34 teeth
    • Shimano FC-E8000
    chain HG53
    • 160 mm for all sizes
    • 110x15mm width front hub
    • 32 spoke holes
    • Centerlock
    • 148x12mm width rear hub
    • 36 spoke holes
    • Centerlock
    • 20mm inner width
    • material: aluminium
    • 11-36 teeth
    • 9 speed
    • 27.5x2.2"
    • kevlar bead
    • 27.5x2.2"
    • kevlar bead
    spokes Black stainless
    • 31,8mm diameter
    • 6° stem angle

    • 70 mm-S, 80 mm-M

    • 720mm width
    • 10mm rise
    headset Merida 2341 Neck
    • 30.9mm diameter
    • 15mm setback
    fender no
    carrier no
    kickstand CL-KA98

    weighed with 27.5" wheels and at frame size M

    light front CG-119PG-BLACK(1)
    light rear CG-404RG-BLK
    Bike Frame Geometry Image
    Frame Size XS S M
    Tyre Sizes 27.5" 27.5" 27.5"
    Frame Size CM 33 38 43
    ST seat tube [mm] 330 380 430
    TT top tube [mm] 570 570 590
    CS chain stay length [mm] 455 438 438
    HTA head tube angle [°] 68 68 68
    STA seat tube angle [°] 73.5 73.5 73.5
    BD bottom bracked drop [mm] 27 27 27
    HT head tube [mm] 115 125 135
    FL fork length [mm] 487 487 487
    R reach [mm] 401 399 416
    S stack [mm] 569 579 588
    WB wheel base [mm] 1120 1104 1125
    SH stand over height [mm] 673 710 749
    No. Item-No. Name Info Pieces Torque NM
    1 SMART ENTRY
    2 SMART ENTRY
    3 2300011412 screw 1 4
    4 2161000670 Battery Cover for eBIG.SEVEN sizes XS / S for eBIG.NINE size M 1
    5 2161000681 Battery Cover for eBIG.SEVEN size M for eBIG.NINE sizes L / XL 1
    6 2300012101 Screw 3 16
    7 2300012112 Screw 3 16
    8 2258000217 Cable Guide 1
    9 2298002501 Screw 1 7
    10 2300010950 Screw 2 4
    11 2311005101 Dropout DH-057 1
    12 2300005272 Screw 1 43954

    Technologies

    IMAGE

    PROLITE 66 TRIPLE BUTTED ALUMINUM

    Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

    IMAGE

    HFS - HYDRO FORMING SYSTEM

    Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

    IMAGE

    X-TAPER HEADTUBE

    Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

    X-TAPER HEADTUBE
    IMAGE

    SMOOTH WELDING

    Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

    SMOOTH WELDING
    IMAGE

    INTERNAL CABLE ROUTING

    Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

    INTERNAL CABLE ROUTING
    IMAGE

    SMART ENTRY

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    SMART ENTRY
    IMAGE

    DI2 READY

    Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

    IMAGE

    F-MOUNT

    ‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

    IMAGE

    K-MOUNT

    Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

    K-MOUNT
    IMAGE

    C-MOUNT

    ‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

    IMAGE

    CASTING MOTOR BRACKET

    Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.