WARP TRI LIMITED

WARP TRI LIMITED

Color variants

WARP TRI LIMITED
  • *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

    • material: carbon
    • 700C wheelsize
    • 100x9/ 130x9mm axle standard
    • BB386-PF30 bottom bracket standard
    frame size S, M, L
    color BLACK/GREEN
    • material: carbon
    derailleur (f) Shimano Ultegra Di2
    shifter front Shimano Ultegra Di2
    shifter rear Shimano Ultegra Di2
    brake lever Shimano Ultegra
    brake front Merida WARP TT integrated (front)
    brake rear Merida WARP TT integrated (rear)
    chain KMC X11-1
    • 11-28 teeth
    • 11 speed
    • 110x9mm width front hub
    • 130x9mm width rear hub
    • 17.5mm inner width
    • 50mm height
    • material: carbon
    • -17° stem angle
    • material: carbon5 ASD
    headset Meida WARP TT
    • Aero shape
    • -21/32mm setback
    • Carbon
    saddle Prologo TGALE TT TIROX
    Bike Frame Geometry Image
    Frame Size S M L
    Tyre Sizes 28" 28" 28"
    Frame Size CM 50 54 58
    ST seat tube [mm] 500 540 580
    TT top tube [mm] 510 550 570
    CS chain stay length [mm] 415 415 415
    HTA head tube angle [°] 72 72 72
    STA seat tube angle [°] 76 76 76
    BD bottom bracked drop [mm] 55 70 70
    HT head tube [mm] 135 135 178
    FL fork length [mm] 366 366 366
    R reach [mm] 384 416 430
    S stack [mm] 519 533 563
    WB wheel base [mm] 987 1021 1044
    SH stand over height [mm] 776 794 833

    Technologies

    IMAGE

    INTERNAL CABLE ROUTING

    Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

    IMAGE

    DOWN TUBE EXIT

    Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

    IMAGE

    DI2 READY

    Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

    IMAGE

    NANO MATRIX CARBON

    To protect the integrity of carbon frames, the fibres are bonded together with an epoxy resin with added nano particles, increasing impact resistance by up to 40%.

    IMAGE

    AWS

    When creating the individual carbon elements, an inflatable bladder is used to ensure there are no wrinkles inside the tube as these can add weight and create weakness. This results in a lighter, stiffer and stronger frame.

    IMAGE

    NACA FASTBACK PROFILE

    The aerodynamics are based around a NACA0028 teardrop profile (National Advisory Committee for Aeronautics) which is truncated. Air moves around the tube as though the missing rear section of the teardrop were still there, saving weight by using less material.

    IMAGE

    INTERNAL CLAMP

    Designing WorldTour bikes is similar to Formula 1: apparently nondescript details can result in saving split seconds. Integrated seat-post clamping minimises turbulence at the top tube.

    IMAGE

    FLIP FLOP HEAD

    Aero bikes deliver the best possible aerodynamics, but superb wind-tunnel performance data is useless if the rider can‘t get into the correct position. The ‘Flip Flop’ head allows seat angles to be optimised for comfort.

    IMAGE

    INTERNAL BLOCK

    First introduced in our 2015 NINETY-SIX, the new version of the 'Internal Block' is incorporated directly in the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.