• material: aluminium
  • 700C wheelsize
  • 142x12mm axle standard
  • external
  • max. 504 Wh
frame size XS, S, M
color MATT BLACK/GREEN (GLOSSY DARK SILVER)
  • Coil
  • 63mm suspension travel
display w/o display
battery lock Abus key
derailleur (r) Shimano Altus RDM2000
shifter rear Shimano Altus rapidfire
  • 38 teeth
  • Shimano FC-E5010
chain KMC e9S
  • 165 mm-XS, 170 mm-S/M/L, 175 mm-XL
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 142x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 20mm inner width
  • material: aluminium
  • 12-36 teeth
  • 9 speed
  • 622-47
  • wire
  • reflecting line
  • 622-47
  • wire
  • reflecting line
spokes Black stainless
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm-XS/S/M, 110 mm-L/XL
  • material: aluminium
  • 640mm width
  • 35mm rise
headset MERIDA 2346 Neck
  • 30.9mm diameter
  • 15mm setback
  • 40mm seatpost suspension travel
fender Sunnywheel SW-FA311-60E1 (MSB)
carrier MERIDA MIK Carrier with Spring clip & H-Cargo Light
kickstand CL-KA98

weighed at frame size S without pedals

Bike Frame Geometry Image
Frame Size XS S M
Tire Sizes 28" 28" 28"
Frame Size CM 42 45 49
ST seat tube [mm] 415 450 490
TT top tube [mm] 575 590 605
CS chain stay length [mm] 490 490 490
HTA head tube angle [°] 69.5 70 70
STA seat tube angle [°] 74 73.5 73
BD bottom bracked drop [mm] 70 70 70
HT head tube [mm] 160 170 185
FL fork length [mm] 477 477 477
R reach [mm] 389 394 398
S stack [mm] 651 662 676
WB wheel base [mm] 1140 1143 1153
Body Height Cm < 158 155 - 165 160 - 177

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.