BIG.SEVEN 200

 

Single chainring aluminium 27.5" wheeled hardtail, featuring a 100 mm air suspension fork, a 10-speed Shimano drivetrain and powerful hydraulic disc brakes. The BIG.SEVEN 200 is ready for your next off-road adventure.
Find Dealer

27.5" wheels offer fantastic acceleration and nimble riding characteristics. Perfect for your next trail outing. We pair our double butted aluminium frame with an air suspension fork and a reliable single chainring 10-speed Shimano drivetrain for the perfect combination of comfort and control. The slightly more upright riding position in comparison to our more racy models puts less strain on the lower back and also improves the visibility of what lies ahead.

The alternative to our BIG.NINE 29er hardtails for riders who prefer the smaller 27.5"" wheels. The latest aluminium frame generation of our BIG.SEVEN TFS and SPEED mountain bikes featuring slim tube shapes create a new look and a more relaxed geometry. A shorter top tube and a higher head tube offering a more upright riding position and enhanced trail visibility. Similarly to our 29er wheeled BIG.NINE range, our classic BIG.SEVEN hardtails are the backbone of our range and showcase the enormous wealth of experience and knowledge we could gain in almost half a century of bike production and manufacturing. They symbolise the symbiosis between modern frame technology, attention to detail and craftsmanship 'Made in Taiwan'.

  • Double butted aluminium frame with 27.5" wheels
  • Less aggressive and more upright geometry for maximum control and comfort
  • SR Suntour 100 mm travel air suspension fork with lockout
  • Shimano Deore 10-speed drivetrain
  • Hydraulic disc brakes
  • Internal cable routing
  • material: aluminium
  • 27.5x2.25" max. wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size XS, S, M, L
color MATT BLUE (WHITE)
  • Air
  • 100mm suspension travel
  • Lockout
  • 42mm fork offset
headset MERIDA M2346
  • material: aluminium
  • 720mm width
  • 10mm rise
  • material: aluminium
  • 31.8mm diameter
  • 7° stem angle
  • 50 mm
grip MERIDA COMP EC
shifter rear Shimano Deore M4100
  • material: aluminium
  • 30.9mm diameter
  • 0mm setback
seat clamp MERIDA COMP QR
pedal VP VPE-891
chain KMC X10
  • 32 teeth
  • 170 mm-S, 175 mm-M up
  • 11-46 teeth
  • 10 speed
  • 20mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
spokes Black stainless
Bike Frame Geometry Image
Frame Size XS S M L
Tyre Sizes 27.5" 27.5" 27.5" 27.5"
ST seat tube [mm] 340 380 440 480
TT top tube [mm] 550 570 590 610
CS chain stay length [mm] 430 430 430 430
HTA head tube angle [°] 69 69 69 69
STA seat tube angle [°] 73 73 73 73
BD bottom bracked drop [mm] 30 30 30 30
HT head tube [mm] 100 115 130 145
FL fork length [mm] 487 487 487 487
R reach [mm] 378 394 409 425
S stack [mm] 563 577 591 605
WB wheel base [mm] 1056 1078 1099 1120
SH stand over height [mm] 649 689 740 778

Technologies

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

X-TAPER HEADTUBE
IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

K-MOUNT
IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.