eBIG.NINE 300 SE EQ

eBIG.NINE 300 SE EQ

 

Find Dealer
  • material: aluminium
  • 29" wheelsize
  • 148x12mm axle standard
  • external
  • max. 504 Wh
frame size M, L, XL
color SILK X'MAS RED/BLACK
  • Coil
  • 100mm suspension travel
  • Tapered
  • 47mm fork offset
headset MERIDA 2341 Neck
  • material: aluminium
  • 720mm width
  • 10mm rise
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm all sizes
grip MERIDA Expert TK
derailleur (r) Shimano Deore Shadow+
shifter rear Shimano Deore
  • material: aluminium
  • 30.9mm diameter
  • 0mm setback
seat clamp MERIDA Expert clamp
  • VPE-537
chain CNHG54
  • 36 teeth
  • Shimano FC-E8000
  • 165 mm-S/M/L, 170 mm-XL
  • 11-42 teeth
  • 10 speed
bottom bracket included
  • 20mm inner width
  • material: aluminium
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • including removeable lever, 6/4mm allen key
spokes Black stainless
light front Herrmans H-BLACK MR4 E
light rear Herrmans H-Trace E-Bike Rear light
carrier YA-355B
fender Sunnywheel SW-FA 513
kickstand CL-KA98, 29"
battery lock Abus key
display Shimano SC-E6100

weighed at frame size M without pedals

Bike Frame Geometry Image
Frame Size M L XL
Tyre Sizes 29" 29" 29"
ST seat tube [mm] 430 480 530
TT top tube [mm] 590 610 630
CS chain stay length [mm] 458 458 458
HTA head tube angle [°] 69.5 69.5 69.5
STA seat tube angle [°] 73.5 73.5 73.5
BD bottom bracket drop [mm] 65 65 65
HT head tube [mm] 115 125 135
FL fork length [mm] 511 511 511
R reach [mm] 402 420 437
S stack [mm] 634 643 652
WB wheel base [mm] 1123 1143 1164
SH stand over height [mm] 733 777 819
No. Item-No. Name Info Pieces Torque NM
1 CABLE GUIDE SMART ENTRY
2 CABLE GUIDE SMART ENTRY
3 A2300000213 SCREW M3x0.5 L13.5mm 2 2~4
4 A2151000026 COVER for battery; eBIG.SEVEN sizes XS / S for battery; eBIG.NINE size M 1
5 A2151000025 COVER for battery; eBIG.SEVEN size M for battery; eBIG.NINE sizes L / XL 1
6 A2300000468 SCREW M8x1.25 L18.5mm 3 11~12
7 A2300000469 SCREW M8x1.25 L23mm 3 11~12
8 A2258000012 CABLE GUIDE for M5 fixation 1
9 A2298000004 SCREW M5x0.8 L15mm with washer 1 3~5
10 A2300000185 SCREW M3x0.5 L20.5mm 2 2~4
11 A2311000067 RD-HANGER DH-057 1
12 A2300000048 SCREW M4x0.7 L8mm 1 3~5

HIGHLIGHTS

A two-component battery cover, which offers the perfect protection for the internal battery of these models. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape.

The eBIG.NINE and eBIG.NINE EQ are not just 'separated' by the equipped fenders, rear racks and lights, but also by less obvious parts like grips, saddle, stem and tyres, that make the eBIG.NINE EQ more comfort and trekking orientated than the eBOG.NINE.   

The eBIG.NINE offers the possibility to fit a water bottle or accessories like a lock or pump to the frame. The frame has (standard) bottle bosses on top of the down tube and at the seat tube, where a special adapter offers a very low mounting position, allowing maximum seat post insertion depth (guaranteed in all frame sizes). 

HFS-hydroforming Prolite 66 triple butted aluminium hardtail frame with a sporty yet comfortable geometry. Size XS, S and M available in 650B, size M, L and XL available in 29er wheel size. ‘Smart Entry’ cable routing for rattle free running. E8000 and E7000 frame version come with casting motor bracket creating an integrated appearance of the motor into the frame as well as provides an extremely strong connection between frame and motor. Comes with integrated fixings for mudguards and side stand.

The geometry of our eBIG.NINE follows one very simple principle: As sporty as possible, as comfortable as necessary. You ride to work in the morning but fancy a little off-road detour on the way home? No problem – that is what these bikes are made for!

‘K-mount’ featuring bikes have fixing points on the chain stays to fit a MERIDA kickstand while ‘C-mount’ equipped bikes have the fixing point for the rear rack (carrier) integrated. ‘F-mount’ equipped bikes have the fixing points for the mudguards (fenders) already integrated.

The E8000 battery is perfectly integrated into the hydroformed down tube and delivers an impressive 500 Wh long detours home – the perfect aggregate for the new E7000 motor, which impresses commuters and sporty riders with its perfect balanced power delivery. However, for the more performance orientated rider we also offer a complete E8000 system.

Technologies

IMAGE
Back to overview

PROLITE 66 TRIPLE BUTTED ALUMINUM

When creating high-end aluminium frames, we use our proven PROLITE 66 (6066) aluminium, as it is incredibly light and durable. In addition, it works exceptionally well with our hydroforming technology, allowing us to create complex shapes, featuring triple butted wall thicknesses, an almost carbon-like appearance and the best possible stiffness-to-weight ratio. While lesser alloys might be cheaper, it is the ideal choice for high-performance bicycle frames.

Watch Video
IMAGE
Back to overview

HFS - HYDRO FORMING SYSTEM

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

SMART ENTRY

Many of our frames offer internal cable routing, where the gear and brake cables are run through the frame for maximum protection and a clean look. Some internally run cables can rattle when riding over uneven surfaces, but our SMART ENTRY system prevents this from happening. Cables, housings and brake hoses are clamped under tension to prevent noisy cable movement. All inlets are completely interchangeable to deal with any kind of cable or wire.

Watch Video
IMAGE
Back to overview

DI2 READY

Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

Watch Video
IMAGE
Back to overview

F-MOUNT

Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of our bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

Watch Video
IMAGE
Back to overview

K-MOUNT

When using your bike in an urban environment, where you might not always have the option to use a specific bike stand, a kickstand is an ideal solution to park your bike safely. Some of our bikes come with a neatly integrated K-MOUNT, which makes fitting a MERIDA kickstand (or any commercial kickstand) easy. And if you don’t want to have a kickstand and prefer the clean appearance of your frame, the K-MOUNT is neatly tucked away underneath your chainstay, difficult to spot if you don’t know it is there.

Watch Video
IMAGE
Back to overview

C-MOUNT

Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

Watch Video
IMAGE
Back to overview

CASTED MOTOR BRACKET

The e-bike motor mount has a sophisticated shape that is only possible to create with casting technology. Casting this piece allows us to create a complex yet lightweight shape that gives an extremely strong connection between the motor and the frame for improved performance and reliability. It also gives the bike and motor a smooth and cleanly integrated appearance.

Watch Video