frame MISSION CX CF3
frame size XS, S, M, L, XL
color DARK BLUE (GREEN)
fork MISSION CX CF
brake lever Shimano Ultegra
headset VP-B303AC Neck
handlebar MERIDA Expert SL
  • 31.8mm diameter
  • -5° stem angle
grip MERIDA Road Expert
derailleur front Shimano Ultegra
shifter front Shimano Ultegra disc
shifter rear Shimano Ultegra disc
  • 27.2mm diameter
  • 15mm setback
  • Carbon
seat clamp MERIDA Expert
saddle MERIDA Expert CC
chain KMC X11-1
  • 11-30 teeth
  • 11 speed
bottom braket FSA BB PF86 for 30mm spindle
  • 100x12mm width front hub
  • 142x12mm width rear hub
  • 19mm inner width
  • 22mm height
  • Centerlock
  • 700x33C
  • folding
  • tubless compatible
  • 700x33C
  • folding
  • tubless compatible
axle rear Fulchee FH1700BK002 12-142
spokes attached
Bike Frame Geometry Image
Frame Size XS S M L XL
Tire Sizes 28" 28" 28" 28" 28"
Frame Size Cm 47 50 53 56 59
ST seat tube [mm] 470 500 530 560 590
TT top tube [mm] 520 535 550 565 580
CS chain stay length [mm] 423 423 423 423 423
HTA head tube angle [°] 70.75 71 71.75 72 72.25
STA seat tube angle [°] 74 74 74 74 74
BD bottom bracked drop [mm] 68 68 68 68 68
HT head tube [mm] 90 109 125 144 163
FL fork length [mm] 400 400 400 400 400
R reach [mm] 373 382 392 401 411
S stack [mm] 514 533 553 572 591
WB wheel base [mm] 999 1013 1016 1029 1042
SH stand over height [mm] 787 815 842 870 894

Highlights

All MISSION CX models feature a full carbon tapered fork with a 12 mm bolt through axle. The bolt through improves stiffness for the axle, whilst the tapered carbon steerer increases vertical stiffness, providing very precise steering and enhanced confidence in corners.

All MISSION CX and CYCLO CROSS models are equipped with disc brakes, providing high-performance braking isolated from the weather and muddy conditions due to their location at the wheel's hub/centre. The new MISSION CX models now feature flat mount brake standard for a neat and flush positioning of the brake caliper.

All our MISSION CX models have the ability to add mudguards, making them more versatile, particularly when used as a training or commuting bike. The removable seat stay bridge (not available on aluminium models) stays in place to securely hold the rear mudguard or gets removed for a cleaner look and improved mud clearance.

Our new MISSION CX features a new frame design with an updated geometry giving it plenty of tyre and toe clearance. Both hugely important on twisty and muddy cyclo cross courses. 

Both carbon and aluminium frames (not including the CYCLO CROSS models) feature 12 mm bolt through axle front and rear to provide extra frame stiffness. It’s also very handy for realigning discs when reinstalling a wheel.

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

Technologies

IMAGE

X-TAPER HEADTUBE

Using a tapered head tube with 1 1/8" bearings in the top and 1 1/4" or 1 1/2" in the bottom creates superb stiffness and precise, confidence inspiring steering.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

NANO MATRIX CARBON

To protect the integrity of carbon frames, the fibres are bonded together with an epoxy resin with added nano particles, increasing impact resistance by up to 40%.

IMAGE

AWS

When creating the individual carbon elements, an inflatable bladder is used to ensure there are no wrinkles inside the tube as these can add weight and create weakness. This results in a lighter, stiffer and stronger frame.

IMAGE

CARBON FORK

Carbon forks provide superb vibration damping and precise steering. All road bikes feature a full carbon fork; the steerer and fork blades are all made of carbon.

IMAGE

12-142 THRU-AXLE

A 142 mm wide 12 mm rear axle fixed directly into the frame increases rear end stiffness whilst simplifying wheel removal and replacement.

IMAGE

12-100 THRU-AXLE

Selected front forks use a 100 mm wide through axle 12 mm in diameter to increase lateral stiffness.

IMAGE

REMOVABLE F-MOUNT

A removable seat stay bridge can be fitted for neater and more secure fitting of rear fenders, but removed for increased mud clearance and a cleaner look.