WARP TRI 5000
|Colors||matt UD Carbon/shiny black|
|Frame||WARP TRI CF4|
|Fork||Full carbon with direct brake mount|
|Derailleur||Shimano Ultegra 11 speed|
|Shifters||Shimano BS-R1, bar end shifters, 22 speed|
|Brake Lever||Profile 3oneA|
|Brakes||Shimano 105, direct mount|
|Chainwheel||Vision Trimax pro TT 52-38 Mega|
|Bbset||Pressfit 86 with FSA adapter|
|Chain||KMC X11EL, 11 speed|
|Hubs||Sealed cartridge bearings, 17mm axle diameter|
|Rim||Vision Metron 55mm deep full carbon|
|Freewheel||Shimano CS-5800, 11 speed,12-25|
|Tires||Continental Grand Sport Race 23mm Kevlar bead|
|Spokes||Aero bladed, 18 radial front and 21 (2:1 ratio) rear|
|Handlebar Stem||Merida Expert -5 degree with carbon faceplate|
|Handlebar||Profile Ozero TT base with T2+ aero clip|
|Headset||FSA NO.16/CC 1-1/8"|
|Seat Post||Unique Warp Aero profiled carbon seat post|
|Head Tube Angle||71||72||72|
|Seat Tube Angle||76-80||76-80||76-80|
|Bottom Bracket Drop||55||70||70|
|Head Tube Length||120||155.5||190|
|Stand Over Height||780||798||828|
The best of two worlds: externally shaped head tube with bigger diameter at the bottom and weight saving smaller diameter at the top. ‘X-Taper Headtubes’ always come with tapered forks or correct adapters fitted. Result: superb stiffness and precise steering even in the toughest conditions without increasing the weight of the frame unnecessarily.
Designing high-end road bikes for a WorldTour squad is similar to the work of a Formula 1 team. You’re in it for the win, and even the most inconspicuous detail can finally result in decisive split seconds being lost. So the “Internal Clamp” of our WARP TT and REACTO is much more than just a technical exercise and visual treat: Our special seat-post clamping mechanism efficiently minimizes turbulences at the top end of the seat tube and thereby saves important power.
The special “NACA Fastback” tube profiles of our WARP TT and REACTO base on the evaluation of data which were collected during comprehensive wind-tunnel tests (with and without pilot simulations). Particularly at the down-tube, seat-tube, and seat-stay sections, the drop-shaped tube designs with their cropped rear ends prove to be optimal in aerodynamic respect. This way, the essential factors of stiffness and aerodynamics can be combined ideally.
Of course, an aero bike has to offer best possible data in terms of aerodynamics. But at MERIDA, best possible adaptability ranges directly second. Because even superb wind-tunnel data can be useless if the pilot is not able to position her-/himself optimally on the bike and thereby produces an unnecessarily high air resistance. Thanks to the “Flip Flop” head for the saddle, the seating angles of our REACTO and WARP TT can be modified optimally.
Like WorldTour pro riders, more and more technology-loving road riders trust in Shimano’s electronic Di2 shifting system, which is characterized by high reliability and efficient, effortless operability. Bikes/frames with the symbol “Di2 Ready” are optimally prepared for the installation of this technology – especially with a battery mounting possibility below the chain stay or in the seat post.
With the WARP TT, the TEAM LAMPRE-MERIDA trusts in an absolute specialist. To improve the rider’s position on the bike, MERIDA’s very own “Modular Head” system enables the increase of the effective head-tube length via special inserts (30 resp. 60 mm). With an adjustable stem, Di2 integration, variable armrests and aero bars, the “Modular Cockpit” of the WARP TT multiplies the options for individual adaptability even more.
Due to a large cable exit in the down tube, “Down Tube Exit” additionally puts an end to awkward handling of internally routed cables.
Rigid carbon front fork, in case of some models realized as full-carbon version. MERIDA carbon forks delight with outstanding vibration damping as well as with superb braking and lateral stiffness. Reliable steering and braking performance in every situation.
Anti Wrinkle System – Due to its technological characteristics, carbon provides designers and developers with many excellent possibilities which are not offered by other raw materials used for bike building (e. g. aluminium). The special surface structure is particularly fascinating – but what does happen inside the frame? MERIDA utilizes specific mould inserts which reduce the wrinkling considerably. Result: More stiffness and durability but less weight.
Elaborately shaped frame designs with special inlets and outlets for internally routed brake and/or shifter cables. “Clean” in a double sense: The bike looks uncluttered while the cables are protected effectively from moisture and dirt.
Carbon bikes are often subject to considerable strain. To increase the quality of the used material, MERIDA utilizes this premium technology: The carbon mats are enriched with special nanoparticles which strengthen the matrix of the epoxy resin. In this way, the impact resistance of the final component construction can be increased successfully by up to 40 %. “Nano Matrix Carbon” refines all MERIDA high-end bikes of Model Year 2014.
WARP TRI 5000