|Fork||Manitou Machete Comp Air fork, 100mm travel|
|Derailleur Rear||Shimano Deore Shadow+|
|Brakes||Shimano M500 hydraulic disc brakes, 180mm centrelock rotors|
|Chainwheel||Shimano CRE80-B 38|
|Hubs||Shimano Deore centrelock, 15mm bolt through front, Boost standard front and rear|
|Rim||MERIDA BIG.NINE Comp CC|
|Freewheel||Shimano HG500, 10 speed, 11-42 teeth|
|Handlebar Stem||MERIDA Expert OS +6|
|Handlebar||MERIDA Expert Oversize clamp, 10mm rise, 720mm wide|
|Headset||MERIDA 2341 Neck|
|Seat Post||MERIDA Expert 30.9mm, 15mm offset|
|Saddle||MERIDA Sport 5|
|Battery||Shimano E8010 500Wh|
|Head Tube Angle||68||68||69.5||69.5||69.5|
|Seat Tube Angle||73.5||73.5||73.5||73.5||73.5|
|Bottom Bracket Drop||27||27||65||65||65|
|Head Tube Length||125||135||115||125||135|
|Stand Over Height||710.3||749||733.3||777||819|
Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.
Using a tapered head tube with 1 1/8" bearings in the top and 1 1/4" or 1 1/2" in the bottom creates superb stiffness and precise, confidence inspiring steering.
Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance you will be convinced it is carbon.
Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.
Cables, housings and brake hoses are clamped under tension to prevent rattling when the trail gets rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.
Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.
Post mount disc brake calipers fit directly onto the seat stay for a strong and light connection whilst a chainstay post mount positions the caliper on the chainstay within the rear triangle for extra protection and better distribution of braking forces. Another benefit is that internal cable routing is also easier and neater via the chainstay.
Selected front forks use a 100 mm wide through axle 12 or 15 mm in diameter to increase lateral stiffness. A 142 mm wide 12 mm rear axle fixed directly into the frame increases rear end stiffness whilst simplifying wheel removal and replacement.
New Boost standard – wider axle widths; 110 mm front and 148 mm rear, allowing a shallower spoke angle for stiffer wheels, especially beneficial in 29ers.
‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.
Integrated mount on the chainstay to fit a MERIDA kick stand.
‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.
Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the e-bike motor and frame for improved performance and reliability.
The suspension fork and/or rear shock can be locked, either directly or via a ‘remote control’ lever on the handlebar.