|Fork||Suntour XCR LOR, Air, 100mm suspension travel, Lockout|
|Derailleur Front||Shimano Deore|
|Derailleur Rear||Shimano XT Shadow|
|Shifters||Shimano Deore / Shimano Deore|
|Brake Lever||Shimano MT-200|
|Chainwheel||FSA Alfa Drive, 36-22 teeth|
|Hubs||Shimano TX505, 100x9mm width, 32 spoke holes, Centerlock / Shimano TX505, 135x9mm width, 32 spoke holes, Centerlock|
|Rim||MERIDA Comp CC, 20mm inner width|
|Freewheel||Shimano HG50, 11-36 teeth, 10 speed|
|Tires||Maxxis Ikon, 29x2.2", fold|
|Handlebar Stem||MERIDA Comp CC, 31.8mm diameter, 6° stem angle|
|Handlebar||MERIDA Expert CC, 720mm width, 10mm rise|
|Headset||MERIDA M2345, 2191025682|
|Seat Post||MERIDA Comp CC, 30.9mm diameter, 0mm setback|
|Saddle||MERIDA Comp CC|
|Top Tube (TT)||570||590||610||630||650|
|Seat Tube (ST)||370||430||470||510||560|
|Chain Stays (CS)||440||440||440||440||440|
|Head Tube Angle (HTA)||70||70||70||70||70|
|Seat Tube Angle (STA)||73||73||73||73||73|
|Bottom Bracket Drop (BD)||60||60||60||60||60|
|Head Tube (HT)||100||115||130||145||160|
|Fork Length (FO)||506||506||506||506||506|
|Wheel Base (WB)||1069||1090||1110||1131||1152|
|Stand Over Height (SH)||679||727||763||800||843|
We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.
Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core.
Using a tapered head tube with 1 1/8" bearings in the top and 1 1/4" or 1 1/2" in the bottom creates superb stiffness and precise, confidence inspiring steering.
Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.
Ensures that internally routed cables and wires can move freely without causing any trouble whilst remaining easily accessible for servicing.
Post mount disc brake calipers fit directly onto the seat stay for a strong and light connection whilst a chainstay post mount positions the caliper on the chainstay within the rear triangle for extra protection and better distribution of braking forces. Another benefit is that internal cable routing is also easier and neater via the chainstay.
‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.
Integrated mount on the chainstay to fit a MERIDA kick stand.
‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.
The suspension fork and/or rear shock can be locked, either directly or via a ‘remote control’ lever on the handlebar.