|Derailleur Front||Shimano Ultegra DF|
|Derailleur Rear||Shimano Ultegra, GS|
|Brake Lever||Shimano Ultegra|
|Chainwheel||Shimano RS510, 50-34 teeth|
|Hubs||VP M700F, 100x9mm width, 24 spoke holes / VP M700R, 130x9mm width, 28 spoke holes|
|Rim||MERIDA Expert SL, 17mm inner width, 22mm height|
|Freewheel||Shimano CS-R7000, 11-30 teeth, 11 speed|
|Tires||Maxxis Dolomites, 700x25C, fold|
|Spokes||Double Butted Black stainless|
|Handlebar Stem||MERIDA Expert CC, 31.8mm diameter, -5° stem angle|
|Handlebar||MERIDA Expert SL|
|Headset||MERIDA M2331 Neck, 2191025659|
|Seat Post||MERIDA Expert CC, 27.2mm diameter, 15mm setback, Carbon|
|Saddle||MERIDA Comp SL|
|Top Tube (TT)||515||520||530||545||560||575||590|
|Seat Tube (ST)||440||470||500||520||540||560||590|
|Chain Stays (CS)||408||408||408||408||408||408||408|
|Head Tube Angle (HTA)||71||71||72||73||73||73||73.5|
|Seat Tube Angle (STA)||75||74.5||74||74||73.5||73||73|
|Bottom Bracket Drop (BD)||66||66||66||66||66||66||66|
|Head Tube (HT)||120||130||140||150||170||190||215|
|Fork Length (FO)||375||375||375||375||375||375||375|
|Wheel Base (WB)||982||983||979||985||995||1005||1014|
|Stand Over Height (SH)||697||720||744||762||779||798||826|
Carbon forks provide superb vibration damping and precise steering. All road bikes feature a full carbon fork; the steerer and fork blades are all made of carbon.
The aerodynamics are based around a NACA0028 teardrop profile (National Advisory Committee for Aeronautics) which is truncated. Air moves around the tube as though the missing rear section of the teardrop were still there, saving weight by using less material.
Using a tapered head tube with 1 1/8" bearings in the top and 1 1/4" or 1 1/2" in the bottom creates superb stiffness and precise, confidence inspiring steering.
Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.
Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.
Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.
Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.
Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.
Road RaceRoad - Fitness - Gravel
SCULTURA DISC TEAM
SCULTURA DISC 8000-E
SCULTURA DISC 7000-E
SCULTURA DISC 6000
SCULTURA DISC 5000
SCULTURA DISC 4000
SCULTURA DISC 500
SCULTURA DISC 400
SCULTURA DISC 200