• material: aluminium
  • 700C wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size M, L
  • Coil
  • 63mm suspension travel
  • lockout
  • BR-MT200 brake caliper
  • BR-MT200 brake caliper
  • AL cap with STS bolt+ ST stop nut
  • material: aluminium
  • 660mm width
  • 25mm rise
  • material: aluminium
  • 25.4mm diameter
  • adjustable
  • 100 mm all sizes
derailleur (r) Shimano RD-M370
derailleur (f) Shimano FD-M370
  • 27.2mm diameter
  • 13mm setback
  • 40mm seatpost suspension travel
  • 48-36-26 teeth
  • 170 mm-XXS/SM, 175 mm-ML/XXL
pedal VP VPE-891
chain KMC M99
crank size 170 mm-XXS/SM, 175 mm-ML/XXL
  • 11-32 teeth
  • 9 speed

weighed at frame size S without pedals

Bike Frame Geometry Image
Frame Size M L
Tire Sizes 28" 28"
Frame Size CM 47 51
St Seat Tubes Mm 470 510
Tt Top Tubes Mm 585 600
Cs Chain Stays Mm 450 450
Hta Head Tube Angles Deg 71 71.5
Sta Seat Tube Angle Deg 73.5 73
Bd Bottom Bracket Drops Mm 70 70
Ht Head Tube Lengths Mm 140 170
Fl Fork Lengths Mm 450 450
R Reachs Mm 390 400
S Stacks Mm 612 642
Wb Wheel Base Mm 1088 1092
Sh Stand Over Height Mm 590 588

Category Highlights

Most CROSSWAY models are also available in a low step through frame, providing an opportunity to find the perfect fit without compromising on equipment and functionality.

6061 double butted and technoformed aluminium frame. Equipped with mounts for rack, mudguards and kickstand.

Our CROSSWAY models are equipped with suspension forks and suspension seat posts, on most models, to iron out any surface bumps. Adjustable ahead stems are also fitted (now including our SPEED models), providing an adjustable riding position for maximum sitting comfort on the bike. The exceptions are the sportier models that feature a regular seat post and stem.

All CROSSWAY 100 up to XT-EDITION models feature tyres with reflective strips on their sidewalls, improving visibility on the road.

Mudguards, racks and kickstands can be added to all CROSSWAY models, making them usable in many circumstances.




We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.



Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 



‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.



‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.