JULIET 7. 300
|Couleur||petrol blue (dark green)|
|Tailles De Cadre|
|Fourche||Suntour XCR 100mm travel air fork with lockout|
|Dérailleur Arrière||Shimano XT shadow|
|Shifters||Shimano Deore 20 speed rapid fire shifters|
|Levier Frein||Shimano M315|
|Brakes||Shimano M315 hydraulic disc, 180mm / 160mm rotors|
|Manivelle||FSA Alfa drive 36 teeth|
|Hubs||Shimano Centerlock quick release|
|Jantes||MERIDA Big 7 Comp CC|
|Roue Libre||Shimano CS-HG50, 10 speed, 11-36 teeth|
|Pneus||Maxxis Ikon 27.5" x 2.2" folding|
|Potence||MERIDA Comp 6061 aluminium, oversize clamp, 15 degree|
|Guidon||MERIDA Comp 660mm wide 25mm rise|
|Tige De Selle||MERIDA Comp 12mm, 27.2mm offset|
|Selle||Female specific Juliet Sport V|
|TAILLES DE CADRE||XS||S||M||L|
|Head Tube Angle||69.5||69.5||70||70|
|Seat Tube Angle||74.5||74.5||74.5||74.5|
|Bottom Bracket Drop||63||63||63||63|
|Head Tube Length||95||100||105||115|
|Stand Over Height||603||635||686||715|
We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.
Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with a metal internal core.
Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance you will be convinced it is carbon.
Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.
Ensures that internally routed cables and wires can move freely without causing any trouble whilst remaining easily accessible for servicing.
The suspension fork and/or rear shock can be locked, either directly or via a ‘remote control’ lever on the handlebar.
Post mount disc brake calipers fit directly onto the seat stay for a strong and light connection whilst a chainstay post mount positions the caliper on the chainstay within the rear triangle for extra protection and better distribution of braking forces. Another benefit is that internal cable routing is also easier and neater via the chainstay.
Integrated mount on the chainstay to fit a MERIDA kick stand.
‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.