With a stunning new, all-carbon chassis the ONE-FORTY 6000 represents a leap forwards in what you should expect your trail bike to be capable of. Radical new geometry delivers the goods on the most technical climbs or the toughest descents, with sizing perfectly tuned to what the rider wants. The 29er wheels work in perfect harmony with our FAST kinematic suspension with RockShox shock and 150 mm Marzocchi fork.
The new ONE-FORTY is the ultimate trail bike, made for the toughest trails in the world. It’s the pinnacle of modern trail riding, with a super-steep 80° seat angle, low front end and bottom bracket allow it to clear the most technical climbs, while longer reach figures across all sizes and a well-balanced 65° head angle mean it’s still more than capable of ripping any descent. With our new sizing system, riders can run a longer or shorter reach frame independently of their height, with suspension that becomes more progressive as you size up to better cope with heavier/harder riders. We’ve focussed on weight reduction and rolling speed too, for improved efficiency. All bikes come with long travel dropper posts, WIRE PORT cable routing and a reliable threaded bottom bracket plus carbon frames have on-board tool storage and FidLock magnetic bottle cages.
- Full carbon frame with FAST kinematic suspension and AGILOMETER sizing
- Radical new trail geometry with full 29er wheels
- 230 mm travel-adjustable dropper post
- Marzocchi and RockShox suspension, 150 mm front, 143 mm rear
- Wide-range Shimano 12-speed drivetrain
- On-board tool storage and FidLock bottle cagex000b
Awards & Media
- 4 piston
- 143mm suspension travel 29"
- material: carbon
- 29x2.5" max. wheelsize
- 148x12mm axle standard
- BSA bottom bracket standard
- Air
- 150mm suspension travel
- Tapered
- 44mm fork offset
- 29x2.6" max. wheelsize
- lockout
- 203 mm
- Multi Release
- 4 piston
- 4 piston
- 32 teeth
- 170 mm-S, 175 mm-M up
- 110x15mm width front hub
- 32 spoke holes
- Centerlock
- 148x12mm width rear hub, 32 spoke holes
- Centerlock
- 29mm inner width
- material: aluminium
- Tubeless ready (tubeless tape and valves not included)
- 10-51 teeth
- 12 speed
- 29x2.5"
- fold
- TR EXO 3C MaxxTera
- 29x2.4"
- fold
- TR EXO+ MaxxTerra
- 34.9mm diameter
- 10mm setback
- 30-230mm travel seatpost
- V-mount
- incl. MERIDA minitool
weighed at frame size MID
Frame Size | XShort | Short | Mid | Long | XLong |
Tyre Sizes | 29" | 29" | 29" | 29" | 29" |
ST seat tube [mm] | 400 | 410 | 425 | 445 | 470 |
TT top tube [mm] | 532 | 559 | 586 | 618 | 649 |
CS chain stay length [mm] | 437.5 | 437.5 | 437.5 | 437.5 | 437.5 |
HTA head tube angle [°] | 65 | 65 | 65 | 65 | 65 |
STA seat tube angle [°] | 80 | 80 | 80 | 80 | 80 |
BD bottom bracket drop [mm] | 35 | 35 | 35 | 35 | 35 |
HT head tube [mm] | 95 | 95 | 95 | 105 | 120 |
FL fork length [mm] | 557 | 557 | 557 | 557 | 557 |
R reach [mm] | 426 | 453 | 480 | 509 | 535 |
S stack [mm] | 607 | 607 | 607 | 616 | 629 |
WB wheel base [mm] | 1177 | 1204 | 1232 | 1265 | 1298 |
SH stand over height [mm] | 722 | 725 | 732 | 731 | 771 |
No. | Item-No. | Name | Info | Pieces | Torque NM |
1 | A2161000217 | MOUNT | for tube/accesoires | 1 | |
2 | A2300000612 | SCREW | M8x1.25 L6mm | 1 | 8~10 |
3 | A2300000471 | BOLT | M6x1 OD10mm L39mm | 1 | 10~12 |
4 | A2294000196 | WASHER | for M6 sunkenhead screw OD16mm | 1 | |
5 | A2298000113 | SCREW | M6x1 L16mm | 2 | 6~8 |
6 | A2292000102 | WASHER | OD19mm ID15mm H0,3mm | 1 | |
7 | A2300000608 | SCREW | M8x1 | 1 | 10~12 |
8 | A2036000025 | MOUNT | for shock without buhsing | 1 | |
9 | A2300000611 | SCREW | M15x1 L18.5mm | 2 | 13~15 |
10 | A2221000033 | BEARING | 6803V-2RS OD26mm ID17mm W5mm | 4 | |
11 | A2294000102 | WASHER | OD21mm ID17.1mm H3mm | 5 | |
12 | A2302000082 | NUT | M15x1 flip chip | 2 | |
13 | A2031000076 | LINK | 1 | ||
14 | A2300000610 | SCREW | M15x1 L16mm | 2 | 13~15 |
15 | A2294000182 | LOCK RING | for bearing | 2 | |
16 | A2300000475 | BOLT | M6x1 OD10/12mm L55mm | 1 | 8~10 |
17 | A2221000032 | BEARING | 6801V-2RS OD21mm ID12mm W5mm | 1 | |
18 | A2221000034 | BEARING | 6800V-2RS OD19mm ID10mm W5mm | 1 | |
19 | A2294000197 | WASHER | for M6 sunkenhead screw OD18.5mm | 1 | |
20 | A2161000161 | COVER | for service opening | 1 | |
21 | A2294000183 | LOCK RING | for protector screw | 1 | |
22 | A2300000559 | SCREW | M5x0.8 L11mm | 1 | 3~5 |
23 | A2294000105 | WASHER | OD17mm ID12.1mm H2mm | 1 | |
24 | A2294000085 | WASHER | OD15.5mm ID10.1mm H2mm | 1 | |
25 | A2143000147 | BLIND PLUG | 2 | ||
26 | A2294000016 | WASHER | OD19mm ID15.1mm H3mm | 1 | |
27 | A2300000484 | SCREW | M4x0.7 L10mm | 1 | 1,5~2 |
28 | A2232000028 | CHAIN GUIDE | for 28T-36T | 1 | |
29 | A2292000106 | WASHER | OD10mm ID6.2mm H0.5mm | 2 | |
30 | A2298000224 | SCREW | M6x1 L16mm | 2 | 6~8 |
31 | A2232000042 | MOUNT | Mount for chain guide | 1 | |
32 | A2292000008 | WASHER | OD10mm ID6.2mm H3mm | 2 | |
33 | A2298000107 | SCREW | M6x1 L12mm | 1 | 6~8 |
34 | A2164000062 | MOUNT | ISCG-05 | 1 | |
35 | A2161000162 | CABLE GUIDE | 1 | ||
36 | A2300000151 | SCREW | M4x0.7 L12mm | 1 | 3~5 |
37 | A2300000598 | BOLT | M6x1 OD15/17mm L55mm | 1 | 8~10 |
38 | A2221000040 | BEARING | 172607V-2RS OD26mm ID17mm W7mm | 1 | |
39 | A2221000043 | BEARING | 3802V-2RS OD24mm ID15mm W7mm | 1 | |
40 | A2300000609 | SCREW | M10x1 L15mm | 1 | 8~10 |
41 | A2300000318 | SCREW | M4x0.7 L12mm | 3 | 3~5 |
42 | A2116000239 | PROTECTOR | 1 | ||
43 | A2158000078 | PROTECTOR | for chain stay | 1 | |
44 | A2311000102 | RD-HANGER | UDH | 1 | |
45 | A2298000223 | SCREW | M6x1 L12mm | 3 | 6~8 |
46 | A2136000076 | MOUNT | PM200 | 1 | |
47 | A2191000188 | HEAD SET | MERIDA/VP-8151 (MH-P16/MH-P16) | 1 | |
48 | A2358000131 | PROTECTOR | for down tube | 1 | |
49 | A2298000024 | SCREW | M5x0.8 L10mm | 2 | 4~6 |
50 | A2362000105 | PROTECTOR | for seat stay | 1 | |
51 | A2002000135 | THRU AXLE | EXPERT TR; L=178.5mm M12x1 TL=13.5mm | 1 |