- material: aluminium
- 29" wheelsize
- 148x12mm axle standard
- intube
- max. 504 Wh
- Air
- 100mm suspension travel
- Tapered
- 51mm fork ofsset
- 2 piston
- 2 piston
- 180 mm
- 180 mm
- material: aluminium
- 34.9mm diameter
- 0mm setback
- V-mount
- incl. MERIDA minitool
- VPE-537
- 38 teeth
- Shimano FC-E8000
- 165 mm-S/M/L, 170 mm-XL
- 10-51 teeth
- 12 speed
- 20mm inner width
- material: aluminium
- 29x2.35"
- fold
- 29x2.35"
- fold
- 110x15mm width front hub
- 32 spoke holes
- Centerlock
- 148x12mm width rear hub
- 36 spoke holes
- Centerlock
- including removeable lever, 6/4mm allen key
- 504Wh
weighed at frame size M without pedals
Frame Size | S | M | L | XL |
Tyre Sizes | 29" | 29" | 29" | 29" |
ST seat tube [mm] | 380 | 430 | 480 | 530 |
TT top tube [mm] | 575 | 590 | 610 | 630 |
CS chain stay length [mm] | 465 | 465 | 465 | 465 |
HTA head tube angle [°] | 68 | 68 | 68 | 68 |
STA seat tube angle [°] | 74.5 | 74.5 | 74.5 | 74.5 |
BD bottom bracket drop [mm] | 62.5 | 62.5 | 62.5 | 62.5 |
HT head tube [mm] | 110 | 120 | 130 | 140 |
FL fork length [mm] | 506 | 506 | 506 | 506 |
R reach [mm] | 404.5 | 417 | 434.5 | 452 |
S stack [mm] | 614.5 | 624 | 633 | 642.5 |
WB wheel base [mm] | 1143 | 1160 | 1181 | 1202 |
No. | Item-No. | Name | Info | Pieces | Torque NM |
1 | 2300005272 | SCREW | 1 | ||
2 | 2311005101 | DROPOUT DH-057 | 1 | ||
3 | 2300010950 | SCREW | 2 | 4 | |
4 | 2258001133 | CABLE GUIDE | 1 | ||
5 | 2298002501 | SCREW | 1 | 5 | |
6 | 2300012101 | SCREW | 3 | 12 | |
7 | 2300012112 | SCREW | 3 | 12 | |
8 | 2136001371 | BC-MOUNT | 1 | ||
9 | 2298011283 | SCREW | 6 | 5 | |
10 | 2298011164 | SCREW | 1 | 5 | |
11 | 2143003600 | PLUG | 1 | ||
12 | 2161001303 | CABLE GUIDE | 1 | ||
13 | 2300014857 | SCREW | 1 | 5 | |
14 | 2161001314 | COVER MOUNT | 1 | ||
15 | 2161001660 | ENERGY GUARD | 1 | ||
16 | 2300011412 | SCREW | 4 | 4 | |
17 | 2143003611 | PLUG | 1 | ||
20 | 2258004471 | CABLE GUIDE | 1 | ||
21 | 2258004943 | CABLE GUIDE | 1 | ||
22 | SMART ENTRY | ||||
23 | 2161001671 | CAP | 1 | ||
24 | 2300011810 | SCREW | 1 | 4 |
HIGHLIGHTS
HFS-hydroforming Prolite 66 triple butted aluminium 29er hardtail frame with integrated battery technology and a sporty yet comfortable geometry. ‘Smart Entry’ cable routing for rattle free running. E8000 and E7000 frame version come with casting motor bracket creating an integrated appearance of the motor into the frame as well as provides an extremely strong connection between frame and motor. Comes with integrated fixings for mudguards and side stand. Multiple fixing positions for water bottles and accessories.
A two-component battery cover, which offers the perfect protection for the internal battery of these models. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape.
The eBIG.NINE and eBIG.NINE EQ are not just 'separated' by the equipped fenders, rear racks and lights, but also by less obvious parts like grips, saddle, stem and tyres, that make the eBIG.NINE EQ more comfort and trekking orientated than the eBOG.NINE.
The eBIG.NINE offers the possibility to fit a water bottle or accessories like a lock or pump to the frame. The frame has (standard) bottle bosses on top of the down tube and at the seat tube, where a special adapter offers a very low mounting position, allowing maximum seat post insertion depth (guaranteed in all frame sizes).
The geometry of our eBIG.NINE follows one very simple principle: As sporty as possible, as comfortable as necessary. You ride to work in the morning but fancy a little off-road detour on the way home? No problem – that is what these bikes are made for!
‘K-mount’ featuring bikes have fixing points on the chain stays to fit a MERIDA kickstand while ‘C-mount’ equipped bikes have the fixing point for the rear rack (carrier) integrated. ‘F-mount’ equipped bikes have the fixing points for the mudguards (fenders) already integrated.
The E8000 battery is perfectly integrated into the hydroformed down tube and delivers an impressive 500 Wh long detours home – the perfect aggregate for the new E7000 motor, which impresses commuters and sporty riders with its perfect balanced power delivery. However, for the more performance orientated rider we also offer a complete E8000 system.