One-Forty 7. 900

Colorsblue/yellow
Frame Sizes
S
M
L
FrameONE-FORTY
ForkRock Shox PIKE RCT3 27 15 2P 150 taper
ShockFox Float CTD BV LV - Performance
DerailleurSram XO1 11s
Shiftersno / SL TRIGGER X0 11SPD RR
Brake Leverattached
BrakesShimano XT-Fin 180 disc
ChainwheelFSA Afterburner 30T 11s
Bbsetattached
ChainKMC X11 11s
HubsDT Swiss 370 15 disc / DT Swiss 370-11s disc
RimDT Swiss 533D-27
FreewheelSram X11s 10-42
TiresSchwalbe NOBBY NIC SnakeSkin 2.35 PSC / Schwalbe ROCK RAZOR SnakeSkin 2.35 PSC
Handlebar StemGravity LIGHT L:45
HandlebarGravity light OS 760 R25
HeadsetBig Conoid A-bearing neck
Seat PostRock Shox Reverb Stealth 31.6
SaddlePrologo Nago Evo X10 STN
Pedalno
Price
Frame SizesSML
Top Tube560595625
Seat Tube390440480
Chain Stays445445445
Head Tube Angle67.56767
Seat Tube Angle747474
Bottom Bracket Drop181818
Head Tube Length100110120
Fork Length540540540
Reach390423450
Stack592601610
Wheel Base112111571188
Stand Over Height707748778
X-TAPER HEADTUBE
The best of two worlds: externally shaped head tube with bigger diameter at the bottom and weight saving smaller diameter at the top. ‘X-Taper Headtubes’ always come with tapered forks or correct adapters fitted. Result: superb stiffness and precise steering even in the toughest conditions without increasing the weight of the frame unnecessarily.
12-142 THRU-AXLE
Thru-axles at the front and/or rear wheel offer various advantages: besides their high torsional stiffness, they especially ensure easy wheel installation and also guarantee an always correct position of the brake rotor. Because in contrast to quick-release solutions, the position of the wheel is always 100 percent the same. MERIDA trusts in 12 mm thru-axles in the rear and 15 mm versions in the front.
DOWN TUBE EXIT
Due to a large cable exit in the down tube, “Down Tube Exit” additionally puts an end to awkward handling of internally routed cables.
DOUBLE STOP 
Rear suspension often causes problems with the rear shifting cable (e.g. formation of loops, abrasion/friction, undesired shifting) which are caused by movement during compression. Thanks to a double break via special sleeves (“Double Stop”), MERIDA keeps the defined cable length constant.
VPK
MERIDA’s in-house “Virtual Pivot Kinematics” is a suspension chassis with a virtual pivot point. You will find VPK in the mountain bike models ONE-FORTY and ONE-SIXTY where it ensures that the bikes of the 145 and 160 and travel category combine outstanding small bump sensitivity, big hit capability and convincing drivetrain and braking neutrality in every imaginable situation.
INTERNAL CABLE
Elaborately shaped frame designs with special inlets and outlets for internally routed brake and/or shifter cables. “Clean” in a double sense: The bike looks uncluttered while the cables are protected effectively from moisture and dirt.
SMOOTH-WELDING
Besides top functionality, MERIDA frames also have to offer a convincing visual appearance. The second welding process during Smooth Welding evens the connecting welding seam – an elaborate concept for a brilliant look without compromises to stability.
LOCK-OUT
The suspension fork and/or the shock unit of your MERIDA bike can be locked directly by moving a lever. This provides an optimum setup e. g. for rides on bumpy surfaces or for powerful sprints – not only during steeper uphill passages!
PROLITE 66 TRIPLE BUTTED ALUMINUM
MERIDA’s premium alloy represents extremely durable and light aluminium of high-end quality. Triple-butted wall thicknesses result not only in exciting frame designs: First of all, they offer an optimum Stiffness-to-Weight (STW) ratio.
HFS - HYDRO FORMING SYSTEM
The mechanical TFS process works from the outside to the inside. In contrast, the complex Hydroforming concept shapes the frame by pushing hot oil under hydraulic high pressure from the inside to the outside. Material: Prolite 66 aluminium.
POST-MOUNT DISC
The friction-free alignment of the brake calliper is considerably eased by direct mounting of the post-mount calliper at the rear dropout. Adaptable to different brake disc sizes thanks to the utilization of differently dimensioned adapters.

Dealer Search

Find your dealer

FRAME DETAILS

6066 Triple butted and hydroformed frameset with smooth welding, internal cable routing  and tapered head tube.  142x12mm rear through axle and 140mm travel


Full Suspension - 140mm travelMountain Bikes


One-Forty 7. 900

One-Forty 7. 900

One-Forty 7. 700

One-Forty 7. 700

One-Forty 7. 500

One-Forty 7. 500