Colour Variants

  • 96mm suspension travel
frame size M, L, XL
  • Air
  • 100mm suspension travel
  • Tapered
  • Remote lockout
  • 110x15mm width front hub
  • 148x12mm width rear hub
  • 21mm inner width
  • 6 bolt
  • Sram XD
hubs attached
  • 29x2.2"
  • folding
  • 3C
  • 29x2.2"
  • folding
  • 3C
Hubs DT Plug-in RWS boost
bottom bracket Sram BB DUB PF MTB 92
  • 10-50 teeth
  • 12 speed
chain Sram XX1 Eagle
shifters no / Sram XX1 Eagle
rear derailleur Sram XX1 Eagle
brake lever Sram Level Ultimate
brakes Sram Level Ultimate
headset FSA NO.55E
  • 31.8mm diameter
  • -17° stem angle
grip MERIDA Team CC
  • 30.9mm diameter
  • 0mm setback
  • 50mm travel seatpost
remote lever 2 Position Remote-dual
saddle Prologo Scratch 2
seat clamp MERIDA Expert
bottle cage Carbon BS319

weighed at frame size M (w/o pedals)

Bike Frame Geometry Image
Frame Size M L XL
Tyre Sizes 29" 29" 29"
Frame Size cm 46 51 56
St Seat Tubes mm 460 510 560
Tt Top Tubes mm 590 615 640
Cs Chain Stays mm 437 437 437
HTA head tube angle [°] 70 70 70
STA seat tube angle [°] 74.5 74.5 74.5
Bd Bottom Bracket Drops mm 40 40 40
Ht Head Tube Lengths mm 100 115 130
Fl Fork Lengths mm 503 503 503
R Reach mm 429 449 468
S Stacks mm 589 603 617
Wb Wheel Base mm 1118 1143 1168
Sh Stand Over Height mm 768 773 776
Height in cm < 183 177 - 190 > 187


Full carbon with the highest level of fibres and an EPS core optimising stiffness to weight performance and ‘Nano Matrix’ for additional impact resistance. ‘Smart Entry’ cable routing for rattle free running. Super stiff power transfer and agile handling provided by the tapered head tube, Boost axle standard and asymmetric chainstays. 

Not just race proven by the MULTIVAN MERIDA BIKING TEAM in their final 2016 season but still competed on by living mountain bike legends like Gunn-Rita Dahle Flesjå and José Antonio Hermida who are looking for lightning fast acceleration, great climbing and descending ability as well as super low weight. 

Rough trails and increased cornering speeds demand precise steering. Our tapered head tube with 1 1/8" bearings in the top and 1 1/2" at the base, combined with a tapered fork, allow this, giving the rider the confidence to push into the next corner that little bit harder.

Lightweight carbon or sophisticated aluminium frame options. Key differences, other than construction materials, are that the carbon frame has a lower weight and is equipped with an integrated seat post clamp to minimise turbulence at the top tube.

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trail gets rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

All models offer Boost technology at the front and rear. The shallower axle standard of 110 mm (front) and 148 mm (rear) allows for a wider spoke angle, resulting in a stiffer and stronger wheel, hugely beneficial on these bikes given the impacts they endure.




Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.



Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.



Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.



Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.



Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.



A single-pivot rear suspension system optimised for XC riding and 1x drivetrains. A super light (80 g) carbon rocker and linkage system create a light, efficient rear end, totally eliminating pedal-bob.



To protect the integrity of carbon frames, the fibres are bonded together with an epoxy resin with added nano particles, increasing impact resistance by up to 40%.



When creating the individual carbon elements, an inflatable bladder is used to ensure there are no wrinkles inside the tube as these can add weight and create weakness. This results in a lighter, stiffer and stronger frame.