BIG.SEVEN 80-D

BIG.SEVEN 80-D

Color variants

BIG.SEVEN 80-D
frame BIG.SEVEN SPEED N
frame size S, M
color MATT-TITAN (BLACK/SILVER)
  • Coil
  • 100mm suspension travel
  • Remote lockout
derailleur (r) Shimano XT shadow
derailleur (f) Shimano Deore
shifter front Shimano Deore
brake lever Shimano MT-200
shifter rear Shimano Deore
brake front Shimano MT-200
brake rear Shimano MT-200
chain KMC X10-1
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
  • 17mm inner width
  • 11-36 teeth
  • 10 speed
  • 27.5x2.2"
  • wire bead
  • 27.5x2.2"
  • wire bead
spokes Black stainless
  • 31.8mm diameter
  • 6° stem angle
  • 690mm width
  • 15mm rise
headset FSA NO.10P Neck15
  • 27.2mm diameter
  • 15mm setback
saddle MERIDA Sport Comfort

weighed at frame size M (w/o pedals)

Bike Frame Geometry Image
Frame Size S M
Tire Sizes 27.5" 27.5"
Frame Size CM 38 44
ST seat tube [mm] 380 440
TT top tube [mm] 570 590
CS chain stay length [mm] 435 435
HTA head tube angle [°] 69 69
STA seat tube angle [°] 73 73
BD bottom bracked drop [mm] 30 30
HT head tube [mm] 115 130
FL fork length [mm] 487 487
R reach [mm] 394 409
S stack [mm] 577 591
WB wheel base [mm] 1083 1104
SH stand over height [mm] 701 753
Body Height Cm 157 - 173 167 - 183

Highlights

6061 series double butted and technoformed aluminium. New tube set for 2019 with a more modern design. Comes equipped with inboard disc mounts, as well as F, C and K-mounts.

Dependent on frame size we offer 650B or 29er versions on our TFS and SPEED frame level. The requirements of smaller riders (reduced standover height, preferred lower cockpit) are best met by 650B on S and M frame sizes whilst at the other side of the spectrum, L and XL only come with 29er wheels. Size M is available in either 650B or 29er. 

Following in the footsteps of the TFS frame which was introduced in 2018, the SPEED frame is now in line to get a makeover for 2019. The introduction of slim tube shapes creates a new look and a more relaxed geometry, through a shorter top tube and a higher head tube, resulting in a more upright riding position and enhanced trail visibility. The new frame also comes with IS brake mounts that are positioned within the rear triangle as well as with kickstand and fender mounts.

All models down to the BIG.NINE LITE frame level feature a 30.9 mm seatpost, the enhanced connection area increases the strength around the top tube/seat tube join and allows the option of fitting a dropper seat post. Models down to BIG.NINE LIMITED allow internal cable routing for the dropper post while the remaining models would require external routing.

Our classic hardtails are not just a much-loved trail companion but the international cycling press also value our design and engineering work. De Telegraaf in the Netherlands made the BIG.NINE XT-EDITION their test winner and polish bike magazine bikeBoard rewarded the BIG.NINE 500 with their over-all test winning credentials as well as with the ‘lightest’ and ‘value for money’ accolades.

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

Our carbon (CF) and aluminium (LITE) models feature a long 422 mm reach, steep 73,5° seat angle, slack 70° head angle and an 80 mm stem (frame size M), affording the next generation XC geometry. Aggressive agility meets stable calmness; perfect for today’s demanding courses.

Technologies

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.