ONE-TWENTY RC 9. 9000

ONE-TWENTY RC 9. 9000

 

Find Dealer Buy now
  • *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

  • Awards & Media

    • 100mm suspension travel
    • material: carbon
    • 29 wheelsize
    • 148x12mm axle standard
    • BB92 bottom bracket standard
    frame size S, M, L, XL
    • Air
    • 120mm suspension travel
    • Tapered
    • remote lockout
    • 44mm fork offset
    color MATT ANTHRACITE/GLOSSY BLACK (GOLD)
    derailleur (r) Shimano XTR Shadow+
    shifter rear Shimano XTR
    • 34 teeth
    • 170 mm-S, 175 mm-M up
    chain Shimano M9100
    crank 170 mm-S, 175 mm-M up
    • 10-51 teeth
    • 12 speed
    • 29x2.35"
    • fold
    • TR EXO
    • 29x2.35"
    • fold
    • TR EXO
    • 110x15mm width front hub
    • 148x12mm width rear hub
    • 25mm inner width
    • 6 Centerlock
    • Shimano 12 Speed
    • material: aluminium
    • Tubeless ready (tubeless tape and valves included)
    • material: aluminium
    • 31.8mm diameter
    • -6° stem angle
    • 70 mm all sizes
    • material: carbon
    • 740mm width
    • flat
    headset FSA NO.47/50CF
    • 30.9mm diameter
    • 0mm setback
    • S 125mm travel seatpost - M/L/XL 150mm travel seatpost
    saddle Prologo Scratch 2
    fender MERIDA MTB lite-front

    weighed at frame size L and 29" wheels without pedals

    Bike Frame Geometry Image
    Frame Size S M L XL
    Tyre Sizes 29" 29" 29" 29"
    ST seat tube [mm] 400 440 480 520
    TT top tube [mm] 571 591 613 635.5
    CS chain stay length [mm] 435 435 435 435
    HTA head tube angle [°] 67.8 67.8 67.8 67.8
    STA seat tube angle [°] 76 76 76 76
    BD bottom bracket drop [mm] 43.5 43.5 43.5 43.5
    HT head tube [mm] 95 95 105 115
    FL fork length [mm] 531 531 531 531
    R reach [mm] 420 440 460 480
    S stack [mm] 603.5 603.5 612.5 622
    WB wheel base [mm] 1137 1157 1180.5 1204.5

    To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

     

    HIGHLIGHTS

    The ONE-TWENTY RC has a very low standover height, giving the rider ample space to manoeuvre when the terrain demands it. It slightly steeper seat and head angle (in comparison to the ONE-TWENTY) provides even more efficiency and a more marathon specific trail behaviour. The short travel rear
    end, make the bike an even more uncompromising climber than its bigger brother. 

    Full carbon frame incorporating ‘Nano Matrix’ technology for additional impact resistance. ‘Smart Entry’ cable clamping system for rattle free running. Tapered head tube for precise steering, Boost standard and rear through axle for rear end stiffness. The floating rear shock provides 100 mm of travel.

    When hitting steam climbs in a marathon race, you want to be able to quickly lock out the front fork without taking your hands off the controls. So, all our ONE-TWENTY RC come with remote lockout, allowing you to lock out the fork from a leaver on your handlebars. The rear shock lockout is positioned on the shock to keep the cockpit clean and manageable.

    The more marathon focused version offers 100 mm of rear wheel travel combined with a 120 mm suspension fork, resulting in a steeper seat and head angle, making the RC even more pedalling efficient and more agile on twisty courses.

    A dropper post is allowing the rider to get the saddle out of the way when the gradient gets steeper, giving him/her more space to manoeuver and control over their bike. The fitted dropper posts featuring internal cable routing and remote levers, creating a cleaner look and allowing easier ‘on the go’ saddle height adjustment.

    Not just race proven by the MULTIVAN MERIDA BIKING TEAM in their final 2016 season but still competed on by living mountain bike legends like Gunn-Rita Dahle Flesjå and José Antonio Hermida who are looking for lightning fast acceleration, great climbing and descending ability as well as super low weight. 

    Technologies

    IMAGE
    Back to overview

    X-TAPER HEADTUBE

    Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

    Watch Video
    IMAGE
    Back to overview

    INTERNAL CABLE ROUTING

    On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

    Watch Video
    IMAGE
    Back to overview

    DOWN TUBE EXIT

    DOWN TUBE EXIT is a feature seen on some of our frames with internally routed cables. By slightly overlapping the downtube where it connects to the bottom bracket, it leaves a small space that allows cables to exit easily. This means they are easily accessible for routine maintenance or replacement, but it prevents excessive movement and noise that can cause wear and distraction.

    Watch Video
    IMAGE
    Back to overview

    SMART ENTRY

    Many of our frames offer internal cable routing, where the gear and brake cables are run through the frame for maximum protection and a clean look. Some internally run cables can rattle when riding over uneven surfaces, but our SMART ENTRY system prevents this from happening. Cables, housings and brake hoses are clamped under tension to prevent noisy cable movement. All inlets are completely interchangeable to deal with any kind of cable or wire.

    Watch Video
    IMAGE
    Back to overview

    DI2 READY

    Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

    Watch Video
    IMAGE
    Back to overview

    NANO MATRIX CARBON

    NANO MATRIX CARBON is a special kind of carbon fibre where we add extremely tiny, nano-scale particles to the resin that binds the individual carbon fibres together. These then work on a molecular level to protect them from damage. It’s so effective that it can actually increase the finished carbon fibre’s impact resistance by up to 40%, allowing us to build stronger and lighter composite frames that result in a faster and tougher bike.

    Watch Video
    IMAGE
    Back to overview

    AWS ANTI WRINKLE SYSTEM

    This is a method we use to manufacture our carbon fibre frames. First, the carbon fibre that makes up the frame is laid around special formers. We then use a bladder to compress the layers against the outside of the frame mould, giving a smooth and wrinkle-free internal finish, removing any voids in between the layers of carbon that can cause potential weak points, resulting in a stronger, lighter frame.

    Watch Video
    IMAGE
    Back to overview

    FLOAT LINK REAR SUSPENSION

    A suspension system where the lower shock mount moves as well as the upper link, giving a supple and sensitive feel over bumps. This system allows our engineers to precisely manipulate the leverage ratio, giving ultimate control of the progression of the suspension so that a FLOAT LINK rear suspension system feels like it offers more wheel travel than the numbers alone suggest.

    IMAGE
    Back to overview

    NON-SLIP TIGHTENING

    This system means you only need a single tool to tighten important bolts, making it easy to secure them while out on the trail and also making routine maintenance faster and simpler. The bolts have a specially shaped head on one end that fits into a matching recess in the frame, preventing rotation. That means there is no hardware bonded into the frame itself, so damaged threads or bolts can be easily replaced.

    Watch Video