• material: aluminium
  • 700C wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size XS, S, S/M, M/L, L, XL
color SILK TITAN (BLACK/GREY)
  • Coil
  • 63mm suspension travel
  • lockout
derailleur (r) Shimano RD-M360
derailleur (f) Shimano FD-TY710
shifter front Shimano ST-EF505
brake lever Shimano ST-EF505
shifter rear Shimano ST-EF505
  • BR-MT200 brake caliper
  • BR-MT200 brake caliper
  • 48-38-28 teeth
  • 170 mm-XXS/SM, 175 mm-ML/XXL
chain KMC M700
crank size 170 mm-XXS/SM, 175 mm-ML/XXL
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
  • 17mm inner width
  • material: aluminium
  • 11-32 teeth
  • 8 speed
spokes Black steel
  • material: aluminium
  • 25.4mm diameter
  • adjustable
  • 100 mm all sizes
  • material: aluminium
  • 660mm width
  • 25mm rise
headset FSA TH888/NO.10
  • 27.2mm diameter
  • 13mm setback
  • 40mm seatpost suspension travel
saddle MERIDA Cross Sport

weighed at frame size M-L without pedals

Bike Frame Geometry Image
Frame Size XS S S/M M/L L XL
Tire Sizes 28" 28" 28" 28" 28" 28"
Frame Size CM 44 46 48 52 55 58
ST seat tube [mm] 440 460 480 520 550 580
TT top tube [mm] 565 575 585 595 605 620
CS chain stay length [mm] 450 450 450 450 450 450
HTA head tube angle [°] 71 71.5 71.5 72 72 72
STA seat tube angle [°] 74 73.5 73.5 73.5 73 73
BD bottom bracked drop [mm] 70 70 70 70 70 70
HT head tube [mm] 125 125 135 135 145 170
FL fork length [mm] 450 450 450 450 450 450
R reach [mm] 394 397 405 414 415 423
S stack [mm] 597 599 609 611 620 644
WB wheel base [mm] 1073 1072 1082 1087 1091 1107
SH stand over height [mm] 730 745 762 793 817 845
Body Height Cm 150 - 159 155 - 167 160 - 174 168 - 183 175 - 189 184 - 195

Technologies

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.