JULIET 7. 100

JULIET 7. 100

Color variants

JULIET 7. 100
  • *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

  • frame JULIET TFS
    frame size XS, S, M, L
    color BLUE (DARK BLUE)
    • Coil
    • 100mm suspension travel
    • Lockout
    derailleur (r) Shimano Alivio
    derailleur (f) Shimano M3000
    shifter front Shimano Altus
    shifter rear Shimano Altus
    brake lever Shimano MT-200
    brake front Shimano MT-200
    brake rear Shimano MT-200
    chain KMC M99
    • 100x9mm width front hub
    • 32 spoke holes
    • Centerlock
    • 135x9mm width rear hub
    • 32 spoke holes
    • Centerlock
    • 20mm inner width
    • 11-34 teeth
    • 9 speed
    • 27.5x2.2"
    • folding
    • 27.5x2.2"
    • folding
    spokes Black stainless
    • 31.8mm diameter
    • 15° stem angle
    • 660mm width
    • 25mm rise
    headset MERIDA M44PSE Neck
    • 27.2mm diameter
    • 12mm setback
    saddle MERIDA Juliet Sport V

    weighed at frame size S (w/o pedals)

    Bike Frame Geometry Image
    Frame Size XS S M L
    Tyre Sizes 27.5" 27.5" 27.5" 27.5"
    Frame Size CM 34 38 43 47
    ST seat tube [mm] 343 381 432 470
    TT top tube [mm] 550 560 575 585
    CS chain stay length [mm] 430 430 430 430
    HTA head tube angle [°] 69.5 69.5 70 70
    STA seat tube angle [°] 74.5 74.5 74.5 74.5
    BD bottom bracked drop [mm] 63 63 63 63
    HT head tube [mm] 95 100 105 115
    FL fork length [mm] 493 493 493 493
    R reach [mm] 384 392 405 413
    S stack [mm] 600 605 612 621
    WB wheel base [mm] 1051 1062 1072 1083
    SH stand over height [mm] 603 635 686 715
    Body Height Cm < 163 157 - 173 167 - 183 > 177

    Technologies

    IMAGE

    SMOOTH WELDING

    Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

    IMAGE

    INTERNAL CABLE ROUTING

    Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

    IMAGE

    DOWN TUBE EXIT

    Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

    IMAGE

    RACELITE 61 ALUMINIUM

    We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

    IMAGE

    TFS - TECHNO FORMING SYSTEM

    Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

    IMAGE

    F-MOUNT

    ‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

    IMAGE

    K-MOUNT

    Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

    IMAGE

    C-MOUNT

    ‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.