eONE-TWENTY 500

eONE-TWENTY 500

Color variants

eONE-TWENTY 500
  • *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

    • material: aluminium
    • 120mm suspension travel
    • 27.5" wheelsize
    • 148x12mm axle standard
    • external
    • max. 504 Wh
    frame size S, M, L, XL
    color SILK TITAN/BLACK
    • Air
    • 130mm suspension travel
    • Tapered
    • 51mm fork offset
    display Shimano SC-E7000
    battery lock Abus key
    derailleur (r) Shimano Deore Shadow+
    shifter rear Shimano Deore
    • 34 teeth
    • Shimano FC-E8000
    chain CNHG54
    • 110x15mm width front hub
    • 32 spoke holes
    • Centerlock
    • 148x12mm width rear hub
    • 36 spoke holes
    • Centerlock
    • 38mm inner width
    • material: aluminium
    • Tubeless ready (tubeless tape and valved not included)
    • 11-42 teeth
    • 10 speed
    spokes Black stainless
    • material: aluminium
    • 35mm diameter
    • 0° stem angle
    • 60 mm all sizes
    • material: aluminium
    • 780mm width
    • 20mm rise
    headset FSA NO.55EP neck
    • material: aluminium
    • 30.9mm diameter
    • 15mm setback
    fender C093-02F + C093-02R

    weighed at frame size M without pedals

    light front CG-119PG-BLACK(1)
    light rear CG-404RG-BLK
    Bike Frame Geometry Image
    Frame Size S M L XL
    Tyre Sizes 27.5" 27.5" 27.5" 27.5"
    Frame Size CM 40 44 49 54
    ST seat tube [mm] 400 440 490 540
    TT top tube [mm] 583 601 623 646
    CS chain stay length [mm] 439.5 439.5 439.5 439.5
    HTA head tube angle [°] 67.5 67.5 67.5 67.5
    STA seat tube angle [°] 75 75 75 75
    BD bottom bracked drop [mm] 27.5 27.5 27.5 27.5
    HT head tube [mm] 110 120 130 140
    FL fork length [mm] 541 541 541 541
    R reach [mm] 420 435 455 475
    S stack [mm] 609 619 628 637
    WB wheel base [mm] 1155 1174 1198 1221
    SH stand over height [mm] 698 730 751 783
    Body Height Cm < 173 167 - 183 177 - 190 > 187

    HIGHLIGHTS

    HFS-hydroforming Prolite 66 triple butted aluminium frame with aggressive trail geometry and 120 mm rear wheel travel – Shimano STePS motor allows for short chain stays delivering agility. ‘Smart Entry’ cable routing for rattle free running. Casting motor bracket creates an integrated appearance of the motor into the frame as well as provides an extremely strong connection between frame and motor.

    The eONE-TWENTY benefits from the advantages of the extra 6 mm width of the ‘Boost 12x148’ standard. Shallower spoke angles and through axles make for stiffer wheels. The chain line moves outwards – necessary to create short chain stays delivering agility and massive grip from the B+ tyres.

    A trunnion mount shock gives our frame designers more flexibility by using a shorter shock with increased stroke. Combined with the ball bearing bushing of the upper mount, shock sensitivity is increased, and the suspension performance can be perfectly tuned.

    650B+ wheels featuring 35-40 mm wide inner width rims and 2.8" tyres which are hugely capable when the going gets rough but also offer loads and loads of up-hill traction, cornering grip, puncture resistance and cushioning, without being draggy or sluggish. Most models offer tubeless ready rims and tyre configurations making a conversion to tubeless incredibly straightforward.

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trail gets rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    With short chain stays the models are blessed with super playful handling. The long reach in combination with a short stem and wide handlebars offer tons of control even in the trickiest situations.

    Technologies

    IMAGE

    PROLITE 66 TRIPLE BUTTED ALUMINUM

    Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

    IMAGE

    X-TAPER HEADTUBE

    Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

    IMAGE

    SMOOTH WELDING

    Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

    IMAGE

    INTERNAL CABLE ROUTING

    Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

    IMAGE

    SMART ENTRY

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    IMAGE

    DI2 READY

    Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

    IMAGE

    CASTING MOTOR BRACKET

    Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.