Find Dealer Buy now
  • *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

  • Awards & Media

    • material: aluminium
    frame size XS, S, M, L, XL
    display Shimano SC-E7000
    battery lock lock for Shimano integrated battery, no key use allen key
    derailleur (r) Shimano XT RDM8100 Shadow+
    shifter rear Shimano SLX 12
    chain CN-M7100
    • 165 mm all sizes
    • 110x15mm width front hub
    • 148x12mm width rear hub
    • 29mm inner width
    spokes Black stainless
    • material: aluminium
    headset Merida 1901
    saddle MERIDA COMP CC
    fender C093-02F + C093-02R
    light front CG-119PG-BLACK(1)
    light rear CG-404RG-BLK
    Bike Frame Geometry Image
    Frame Size XS S M L XL
    Tyre Sizes 29/27.5" 29/27.5" 29/27.5" 29/27.5" 29/27.5"
    ST seat tube [mm] 405 420 440 470 500
    TT top tube [mm] 563 584 605 629 652
    CS chain stay length [mm] 439.5 439.5 439.5 439.5 439.5
    HTA head tube angle [°] 65.5 65.5 65.5 65.5 65.5
    STA seat tube angle [°] 75.5 75.5 75.5 75.5 75.5
    BD bottom bracked drop [mm] 17.5 17.5 17.5 17.5 17.5
    HT head tube [mm] 110 115 120 135 150
    FL fork length [mm] 571 571 571 571 571
    R reach [mm] 400 420 440 460 480
    S stack [mm] 629 633 638 652 665
    WB wheel base [mm] 1168 1190 1212 1238.5 1264.5
    SH stand over height [mm] 737 736 734 755 777
    No. Item-No. Name Info Pieces Torque NM
    1 2294001180 WASHER 2
    2 2221002395 BEARING 3802V-2RS 24D*15D*7W 2
    3 2300012662 BOLT 1
    4 2300012673 SCREW 1 18
    5 2300014426 SCREW 1 12
    6 2300014103 BOLT 1
    7 2035001617 S-LINK 1
    8 2221002254 BEARING 6800V2RS 19D*10D*5W 2
    9 2300011865 SCREW 2 16
    10 2294004633 WASHER 2
    11 2221002265 BEARING 6801V-2RS 21D*12D*5W 2
    12 2300012695 SCREW 1 14
    13 2300012684 BOLT 1
    14 2294002255 WASHER 2
    15 2294004826 WASHER 4
    16 2221002328 BEARING 12214V-2RS 21D*12D*4W 8
    17 2300012703 BOLT 4
    18 2300012714 SCREW 4 14
    19 2300005272 SCREW 1 5
    20 2311005101 DROPOUT DH-057 1
    21 2300010950 SCREW 2 4
    22 2161001314 COVER MOUNT 1
    23 2300011412 SCREW 4 4
    24 2143003600 PLUG 1
    25 2298011283 SCREW 4 5
    26 2161001303 CABLE GUIDE 1
    27 2161001660 ENERGY GUARD 1
    28 2300014857 SCREW 1 5
    29 2143002869 PLUG 1
    30 2300012101 SCREW 3 12
    31 2300012112 SCREW 3 12
    32 2258001133 CABLE GUIDE 1
    33 2298002501 SCREW 1 5
    34 2258003801 CABLE GUIDE 1
    35 2161001671 CAP 1
    36 2300011810 SCREW 1 4
    37 2258004084 SMART ENTRY 1
    38 2258004341 SMART ENTRY 1
    39 2258004716 SMART ENTRY 1
    40 2143003804 PLUG 1


    HFS-hydroformed Racelite 61 double butted aluminium frame featuring internal battery technology and an aggressive enduro geometry with 160 mm rear wheel travel. Shimano STePS motor allows for short chain stays delivering agility. ‘Smart Entry’ cable routing for rattle free running. Casting motor bracket creates an integrated appearance of the motor into the frame as well as provides an extremely strong connection between frame and motor.

    A two-component battery cover, which offers the perfect protection for the internal battery of these models. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape.

    First introduced in 2015, the e-bike version of the 'Internal Block' is incorporated directly into the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

    The eONE-SIXTY features a perfectly positioned satellite on/off switch, at the head tube end of the top tube, and a well-protected satellite charging port, positioned in the main frame triangle, just above the motor.

    To give the e-full suspension bikes precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5" tyre and a 650B rear wheel, equipped with a slightly wider 2.6" tyre. The perfect combination of precision, playfulness and traction.

    Specifically located openings on the carbon models near the head tube which work like a chimney and allow the warm air to dissipate to guarantee the optimum operating temperature of the internal battery. The 'Thermo Gate' enables the battery to perform at its best, in any condition.

    Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.

    ‘Boost’ standard front & rear. The extra 6 mm rear hub and 10 mm front hub spacing in comparison with conventional hubs brings the width up to 148 mm / 110 mm and gives the eONE-SIXTY wheels noticeably more stiffness and strength.




    Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.



    Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.



    Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.



    Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.



    Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.



    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.



    Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.



    Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).



    Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.



    A two-component battery cover, which offers perfect protection for the internal battery. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape. All critical parts like the rubber strap and o-rings for perfect fitting can be replaced.