frame REACTO TRACK
frame size XS, S, M/L, XL
fork MERIDA REACTO TRACK CF2
shifter front no
shifter rear no
chain KMC Z610HX
  • 9x100mm width front hub
  • 24 spoke holes
  • 9x130mm width rear hub
  • 28 spoke holes
  • 17mm inner width
  • 35mm height
spokes Double Butted Black stainless
  • 31.8mm diameter
  • -5° stem angle
handlebar MERIDA Expert FX
headset MERIDA M2331 Neck
  • Aero shape
  • 15mm setback
  • Carbon
saddle MERIDA Comp SL

weighed at frame size M/L (w/o pedals)

color GREEN (BLACK)
Bike Frame Geometry Image
Frame Size XS S M/L XL
Tire Sizes 28" 28" 28" 28"
Frame Size CM 47 50 54 59
ST seat tube [mm] 470 500 540 590
TT top tube [mm] 518 530 560 590
CS chain stay length [mm] 411(46/15T) 411(46/15T) 411(46/15T) 411(46/15T)
HTA head tube angle [°] 71 72 73 73
STA seat tube angle [°] 74 74 73 73
BD bottom bracked drop [mm] 55 55 55 55
HT head tube [mm] 95 105 135 165
FL fork length [mm] 369 369 369 369
R reach [mm] 381 389 400 421
S stack [mm] 479 492 524 553
WB wheel base [mm] 966 970 982 1012
SH stand over height [mm] 739 764 800 843
Body Height Cm < 167 163 - 172 173 - 182 > 183

Highlights

Lightweight 6066 series aluminium, triple butted and hydroformed into an aerodynamic shape. Featuring a tapered head tube and adjustable rear dropouts.

Perfectly designed for an impressive look: It is difficult to spot the tube-to-tube transitions of our ‘One Piece Seat tube’.

All REACTO models feature a full carbon fork with a tapered steerer to give precise, confidence inspiring handling. Aluminium and CF2 carbon models feature a ‘regular’ 1 1/8" to 1 1/2" taper. The high end CF4 frame has a slimmed down front profile and uses a 1 1/8" to 1 1/4" taper.

Speed is everything – that is raison d'être for track bikes. The down tube and seat tube feature the ‘NACA Fastback’ tube profile which, due to its truncated drop shape, enables perfect airflow at the lowest possible weight.

As comfort is not a major priority for a track bike, it’s fitted with fast rolling 23 mm tyres.

The adjustability of the horizontal dropouts on our REACTO TRACK is vast, allowing a broad range of chain ring sizes to be used without the need to adjust the chain.

Not everybody goes this far: Right from the start, the frame of our REACTO TRACK is UCI certified and therefore is ready to be raced – at any level.

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

CARBON FORK

Carbon forks provide superb vibration damping and precise steering. All road bikes feature a full carbon fork; the steerer and fork blades are all made of carbon.

IMAGE

NACA FASTBACK PROFILE

The aerodynamics are based around a NACA0028 teardrop profile (National Advisory Committee for Aeronautics) which is truncated. Air moves around the tube as though the missing rear section of the teardrop were still there, saving weight by using less material.

IMAGE

INTERNAL CLAMP

Designing WorldTour bikes is similar to Formula 1: apparently nondescript details can result in saving split seconds. Integrated seat-post clamping minimises turbulence at the top tube.

REACTO COLLECTION

AERODYNAMICS SIMPLIFIED

View the range