Find Dealer Buy now
  • *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

    • material: aluminium
    • 700C wheelsize
    • 142x12mm axle standard
    • intube
    • max. 504 Wh
    • eSPRESSO L XS(43L)-S(47L)-M(51L)-L(55L)
    • Coil
    • 63mm suspension travel
    display Shimano SC-E6100
    battery lock Abus key
    shifter rear Shimano SW-E6010-R
    • 38 teeth
    • Shimano FC-E6100
    chain KMC Z1eHX
    • 170 mm-XS/S/M 175 mm-L/XL
    • 100x15mm width front hub
    • 32 spoke holes
    • Centerlock
    • 135x9mm width rear hub
    • 36 spoke holes
    • Centerlock
    • 20mm inner width
    • material: aluminium
    • 622-50
    • wire
    • reflecting line
    • 622-50
    • wire
    • reflecting line
    spokes Black stainless
    • material: aluminium
    • 31.8mm diameter
    • adjustable
    • 90 mm-XS/S/M, 110 mm-L/XL
    • material: aluminium
    • 660mm width
    • 15mm rise
    headset MERIDA 2346 Neck
    • material: aluminium
    • 34.9mm diameter
    • 0mm setback
    fender Sunnywheel SW-FA311-60E1 (MSB)
    carrier MERIDA MIK Carrier with Spring clip & H-Cargo Light
    kickstand CL-KA98

    weighed at frame size M without pedals

    light front Herrmans H-BLACK MR4 E
    light rear Herrmans H-Cargo integrated in MERIDA MIK carrier
    Bike Frame Geometry Image
    Frame Size S M L
    Tyre Sizes 28" 28" 28"
    ST seat tube [mm] 470 510 550
    TT top tube [mm] 580 590 610
    CS chain stay length [mm] 478 478 478
    HTA head tube angle [°] 71 71 71.5
    STA seat tube angle [°] 74.5 74.5 74
    BD bottom bracked drop [mm] 70 70 70
    HT head tube [mm] 140 155 175
    FL fork length [mm] 475 475 475
    R reach [mm] 403.5 409.5 417
    S stack [mm] 637 651.5 672.5
    WB wheel base [mm] 1118 1129 1138
    Bike Frame Geometry Image
    No. Item-No. Name Info Pieces Torque NM
    1 2311005587 DROPOUT DH-064A-L 1
    2 2311005598 DROPOUT DH-064A-R 1
    3 2294002501 WASHER 4
    4 2300014437 SCREW 4
    5 2300014932 NUT 4
    6 2300012101 SCREW 3 16
    7 2300012112 SCREW 3 16
    8 2136001371 BC-MOUNT 1
    9 2298012187 SCREW 6 5
    10 2298011164 SCREW 1 5
    11 2143003600 PLUG 1
    12 2161001303 CABLE GUIDE 1
    13 2300014857 SCREW 1 5
    14 2161001314 COVER MOUNT 1
    15 2161001660 ENERGY GUARD 1
    16 2300011412 SCREW 4 4
    17 2143003611 PLUG 1
    18 2258004471 CABLE GUIDE 1
    19 2258004943 CABLE GUIDE 1
    22 2143003213 BLIND PLUG if no carrier is mounted 2
    23 2298011131 SCREW if no carrier is mounted 2 8
    24 2258001133 CABLE GUIDE 1
    25 2298002501 SCREW 1 5
    26 2258004910 CABLE GUIDE for Di2 cables 1
    27 2300005272 SCREW for Di2 cables 1

    To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.


    HFS-hydroforming Prolite 66 triple butted aluminium frame with internal battery technology, based around fast rolling 700c wheels and with commuting and leisure riding in mind. A higher front end and a compact geometry make for a more upright and extremely comfortable riding position. Comes equipped (or ready to be equipped) with mudguards, rear rack, side stand, lock and lights.

    A two-component battery cover, which offers the perfect protection for the internal battery of these models. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape.

    The new Shimano BT-E8035 internal battery has a very compact size design which is optimised for the integrated use in the down tube. The battery is equipped with modern, up-to-date battery cells, which are very durable and long lasting. Even after 1000 charging cycles it still has 60% of the capacity, which is currently the best in its class. 

    The eSPRESSO range comes either in regular or equipped version, which features mudguards, lights, rear rack and a kickstand. That means you are ready for anything from the moment you leave the store. And if your bike is non-equipped, then you have all fixing points in place, ready for when you want to add fenders and a carrier.

    Our 'classic' eSPRESSO range sits on fast rolling 700c wheels, ideal for rides on roads, lanes and smooth tracks. We fit 50 mm wide tyres with reflective side walls and puncture protection that will get you to your destination quickly and safely. On the other hand, at our 650B eSPRESSO TK and CC, big volume 650B tyres are specified, which not only offer better comfort but also guarantee better puncture protection.

    The system weight of a bike is the combined weight of bike, rider and additional luggage. The allowed system weight is 140 kg. As an e-bike is already heavier than a regular bike, and as it also makes it easier to transport larger amounts of luggage, it is imperative to certify a higher overall system weight. All MERIDA e-bikes, as well as all used componentry, go through a rigorous and e-bike specific testing schedule which mimics the higher forces and strains to guarantee the rider the highest level of safety.

    We feature internal cable routing on all our eSPRESSO models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing and gives the bike a cleaner look.

    In our eSPRESSO range, you can choose between the classic diamond or the extra low step-through (yet super torsionally stiff) frame so that you can find the ideal bike for your preferences. We also offer a variety of different motor and battery combinations in our eSPRESSO range giving you even more choice to select the perfect eSPRESSO for your needs.




    Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.



    Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.



    Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.



    Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.



    Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.



    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.



    Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.



    ‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.



    Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).



    ‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 



    Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.



    The slider dropout offers plenty of horizontal adjustment for smooth and easy chain tensioning of hub gear systems, without the need of an added chain tensioner. Its voluminous design offers optimum frame stiffness.