eSPRESSO 300 SE L

eSPRESSO 300 SE L

Color variants

eSPRESSO 300 SE L
frame eSPRESSO LITE
frame size XS, S, M
color GLOSSY ANTHRACITE (MATT BLACK)
fork Suntour NEX-PM-DS; Coil; 63 STR;
display Shimano SC-E6100
drive unit Shimano E5000; 40Nm
battery lock Abus key
battery Shimano E8010; 504Wh
derailleur (r) Shimano Altus RDM2000
derailleur (f) no
shifter front no
brake lever attached
shifter rear Shimano Altus rapidfire
brake front Shimano MT-200; 2 piston
brake rear Shimano MT-200; 2 piston
chainwheel Shimano CRE50; 38 ATC
chain KMC e9S
crank size Shimano FC-E5010
hub front Shimano TX505; 100x9 WHF; 32 SPH; Centerlock
hub rear Shimano MT400; 142x12 WHR; 36 SPH; Centerlock
rim MERIDA Comp TK; 20 IWR
freewheel Shimano HG400; 12-36 ATC; 9 GER
tire front Continental RIDE TOUR; 622x42"; reflective stripe
tire rear Continental RIDE TOUR; 622x42"; reflective stripe
spokes Black stainless
handlebar stem MERIDA Expert CC; 31.8 DSH; 17 ASD
handlebar MERIDA Expert TK; 660 WHB; 15 RHB
headset MERIDA 2346 Neck
seat post MERIDA Expert; 30.9 DSP; 15 SSB
saddle MERIDA Expert TK
kickstand CL-KA98
Bike Frame Geometry Image
Frame Size XS S M
Tyre Sizes 28" 28" 28"
Frame Size CM 43 47 51
ST seat tube [mm] 430 470 510
TT top tube [mm] 565 580 590
CS chain stay length [mm] 475 475 475
HTA head tube angle [°] 70.5 71 71
STA seat tube angle [°] 74 73.5 73.5
BD bottom bracked drop [mm] 70 70 70
HT head tube [mm] 130 140 155
FL fork length [mm] 477 477 477
R reach [mm] 385 391 397
S stack [mm] 627 638 653
WB wheel base [mm] 1101 1105 1116
SH stand over height [mm] 723 757 792

CATEGORY HIGHLIGHTS

HFS-hydroforming Prolite 66 triple butted aluminium frame based around fast rolling 700c wheels and with commuting and leisure riding in mind. A higher front end and a compact geometry make for a more upright and extremely comfortable riding position. Comes equipped with mudguards, rear rack, side stand, lock and lights.

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.