ONE-TWENTY RC 300

ONE-TWENTY RC 300

 

Find Dealer
  • *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

    • 100mm suspension travel
    • material: aluminium
    • 29x2.35" max. wheelsize
    • 148x12mm axle standard
    • BB92 bottom bracket standard
    frame size S, M, L, XL
    • Air
    • 120mm suspension travel
    • Tapered
    • Remote lockout
    • 46mm fork offset
    color TEAL-BLUE (LIME)
    derailleur (f) Shimano Alivio
    shifter front Shimano Alivio
    shifter rear Shimano Alivio
    • 36-22 teeth
    • 170 mm-S, 175 mm-M up
    chain KMC X10
    crank 170 mm-S, 175 mm-M up
    • 110x15mm width front hub
    • 32 spoke holes
    • Centerlock
    • 148x12mm width rear hub
    • 32 spoke holes
    • Centerlock
    • 20mm inner width
    • material: aluminium
    • 11-36 teeth
    • 9 speed
    spokes Black stainless
    • material: aluminium
    • 31.8mm diameter
    • 6° stem angle
    • 70 mm all sizes
    • material: aluminium
    • 720mm width
    • 10mm rise
    headset FSA NO.47/50
    • material: aluminium
    • 30.9mm diameter
    • 0mm setback
    saddle MERIDA COMP CC

    weighed with 29" wheels and at frame size L, without pedals

    max. weight 135 kg
    Bike Frame Geometry Image
    Frame Size S M L XL
    Tyre Sizes 29" 29" 29" 29"
    ST seat tube [mm] 400 440 480 520
    TT top tube [mm] 571 591 613 635.5
    CS chain stay length [mm] 435 435 435 435
    HTA head tube angle [°] 67.8 67.8 67.8 67.8
    STA seat tube angle [°] 76 76 76 76
    BD bottom bracket drop [mm] 44 44 44 44
    HT head tube [mm] 95 95 105 115
    FL fork length [mm] 531 531 531 531
    R reach [mm] 420 440 460 480
    S stack [mm] 604 604 613 622
    WB wheel base [mm] 1137 1157 1181 1205
    SH stand over height [mm] 703 725 755 783
    No. Item-No. Name Info Pieces Torque NM
    1 A2294000016 WASHER OD19mm ID15.1mm H3mm 1
    2 A2294000102 WASHER OD21mm ID17.1mm H3mm 1
    3 A2221000043 BEARING 3802V-2RD OD24mm ID15mm W7mm 1
    4 A2221000040 BEARING 172607V OD26mm ID17mm W7mm 1
    5 A2300000280 SCREW M10x1 L15mm 1 16~18
    6 A2300000279 BOLT M10x1 OD15/17mm L68mm 1
    7 A2300000340 SCREW M6x1 L13.5mm 1 10~12
    8 A2300000339 BOLT M6x1 OD10mm L55.5mm 1
    9 A2294000093 WASHER OD15mm ID10.1mm H3mm 2
    12 A2221000034 BEARING 6800V2RS OD19mm ID10mm W5mm 2
    13 A2300000281 SCREW M10x1 L15mm 2
    14 A2221000035 BEARING 6801V-2RS OD21mm ID12mm W5mm 6
    15 A2300000285 SCREW M8x1 L16.5mm 1 12~14
    16 A2300000284 BOLT M8x1 OD12mm L68.5mm 1
    17 A2294000023 WASHER OD15mm ID12.1mm H3mm 6
    18 A2294000105 WASHER OD17mm ID12.1mm H2mm 4
    19 A2300000306 SCREW M8x1 L13.5mm 4 12~14
    20 A2300000307 BOLT M8x1 OD12mm L16mm 4
    21 A2311000059 RD-HANGER DH-053 1
    22 A2300000129 SCREW M3x0.5 L10mm 2 2~4
    23 A2300000536 SCREW M4x0.7 L8mm 1 2~4
    24 A2258000056 CABLE PLUG for RD/FD 2
    25 A2258000057 CABLE GUIDE for BB 1
    26 A2300000245 SCREW M4x0.7 L8mm 1 3~5
    27 A2300000213 SCREW M3x0.5 L13.5mm 2 2~4
    28 CABLE GUIDE SMART ENTRY
    29 CABLE GUIDE SMART ENTRY

    To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

     

    HIGHLIGHTS

    Selected bolts can be tightened via a TORX 30 key from just one side, without running the risk that the opposite side slips or turns, allowing faster and more straightforward tightening of important hardware components.

    A trunnion mount shock gives our frame designers more flexibility by using a shorter shock with increased stroke. Combined with the ball bearing bushing of the upper mount, shock sensitivity is increased, and the suspension performance can be perfectly tuned.

    A dropper post is allowing the rider to get the saddle out of the way when the gradient gets steeper, giving him/her more space to manoeuver and control over their bike. The fitted dropper posts featuring internal cable routing and remote levers, creating a cleaner look and allowing easier ‘on the go’ saddle height adjustment.

    Technologies

    IMAGE
    Back to overview

    PROLITE 66 TRIPLE BUTTED ALUMINUM

    When creating high-end aluminium frames, we use our proven PROLITE 66 (6066) aluminium, as it is incredibly light and durable. In addition, it works exceptionally well with our hydroforming technology, allowing us to create complex shapes, featuring triple butted wall thicknesses, an almost carbon-like appearance and the best possible stiffness-to-weight ratio. While lesser alloys might be cheaper, it is the ideal choice for high-performance bicycle frames.

    Watch Video
    IMAGE
    Back to overview

    X-TAPER HEADTUBE

    Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

    Watch Video
    IMAGE
    Back to overview

    SMOOTH WELDING

    This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

    Watch Video
    IMAGE
    Back to overview

    INTERNAL CABLE ROUTING

    On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

    Watch Video
    IMAGE
    Back to overview

    DOWN TUBE EXIT

    DOWN TUBE EXIT is a feature seen on some of our frames with internally routed cables. By slightly overlapping the downtube where it connects to the bottom bracket, it leaves a small space that allows cables to exit easily. This means they are easily accessible for routine maintenance or replacement, but it prevents excessive movement and noise that can cause wear and distraction.

    Watch Video
    IMAGE
    Back to overview

    SMART ENTRY

    Many of our frames offer internal cable routing, where the gear and brake cables are run through the frame for maximum protection and a clean look. Some internally run cables can rattle when riding over uneven surfaces, but our SMART ENTRY system prevents this from happening. Cables, housings and brake hoses are clamped under tension to prevent noisy cable movement. All inlets are completely interchangeable to deal with any kind of cable or wire.

    Watch Video
    IMAGE
    Back to overview

    DI2 READY

    Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

    Watch Video
    IMAGE
    Back to overview

    FLOAT LINK REAR SUSPENSION

    A suspension system where the lower shock mount moves as well as the upper link, giving a supple and sensitive feel over bumps. This system allows our engineers to precisely manipulate the leverage ratio, giving ultimate control of the progression of the suspension so that a FLOAT LINK rear suspension system feels like it offers more wheel travel than the numbers alone suggest.

    IMAGE
    Back to overview

    NON-SLIP TIGHTENING

    This system means you only need a single tool to tighten important bolts, making it easy to secure them while out on the trail and also making routine maintenance faster and simpler. The bolts have a specially shaped head on one end that fits into a matching recess in the frame, preventing rotation. That means there is no hardware bonded into the frame itself, so damaged threads or bolts can be easily replaced.

    Watch Video