• material: aluminium
  • 700x25C max. wheelsize
  • 100x9/ 135x9mm axle standard
  • Pressfit bottom bracket standard
frame size S/M, M/L, L
color SILK BLUE (GREY)
  • 700x25C max. wheelsize
derailleur (f) Shimano Tiagra
shifter front Shimano Tiagra
shifter rear Shimano Tiagra
brake lever Shimano Tiagra
brake front MERIDA ROAD Comp
brake rear MERIDA ROAD Comp
  • 50-34 teeth
  • 165 mm-4S/3S/XXS, 170 mm-XS/S, 172.5 mm-SM/ML, 175 mm-L/XL
chain KMC X10
crank size 165 mm-4S/3S/XXS, 170 mm-XS/S, 172.5 mm-SM/ML, 175 mm-L/XL
  • 100x9mm width front hub
  • 24 spoke holes
  • 130x9mm width rear hub
  • 28 spoke holes
  • 17mm inner width
  • 24mm height
  • material: aluminium
  • Tubeless ready (tubeless tape and valves not included)
  • 12-28 teeth
  • 10 speed
spokes Black stainless
  • 31.8mm diameter
  • material: aluminium
  • -6° stem angle
  • 70 mm-4S/3S, 80 mm-XXS/XS, 90 mm-S, 100 mm-SM/ML, 110 mm-L/XL
  • material: aluminium
  • 380mm(4XS,3XS,XXS) , 400mm (XS-S) , 420mm (S/M-M/L) , 440mm (L-XL)
headset MERIDA M2339 Neck
  • 27.2mm diameter
  • 12mm setback

weighed with 700C wheels and at frame size M-L, without pedals

Bike Frame Geometry Image
Frame Size S/M M/L L
Tyre Sizes 28" 28" 28"
Frame Size CM 52 54 56
ST seat tube [mm] 520 540 560
TT top tube [mm] 545 560 575
CS chain stay length [mm] 408 408 408
HTA head tube angle [°] 73 73 73
STA seat tube angle [°] 74 73.5 73
BD bottom bracked drop [mm] 66 66 66
HT head tube [mm] 150 170 190
FL fork length [mm] 375 375 375
R reach [mm] 386 390 394
S stack [mm] 555 574 593
WB wheel base [mm] 985 995 1005
SH stand over height [mm] 762 779 798

CATEGORY HIGHLIGHTS

All models feature a full carbon fork with a tapered steerer to give precise, confidence-inspiring steering. All SCULTURA Alloy and CF2 carbon models feature a ‘regular’ 1 1/8" to 1 1/2" taper. The high-end SCULTURA CF4 frame has a slimmed down front profile and uses a 1 1/8" to 1 1/4" taper, the new REACTO frames a 1 1/2" to 1 1/4"taper.

Our wind tunnel learnings from the REACTO design project have been used to create a smaller aerodynamically optimised ‘NACA Fastback’ tube profile. The more extreme truncation of the teardrop shaped tubes enables perfect airflow at the lowest possible weight.

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.