eBIG.NINE 500

eBIG.NINE 500

Color variants

eBIG.NINE 500
  • *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

  • frame eBIG.NINE LITE
    frame size M, L, XL
    color MATT-GREY/BLACK (BLUE)
    • Air
    • 100mm suspension travel
    • Tapered
    display Shimano SC-E7000
    battery lock Abus key
    derailleur (r) Shimano Deore Shadow+
    derailleur (f) no
    shifter front no
    shifter rear Shimano Deore
    brake lever attached
    brake front Shimano MT-200
    brake rear Shimano MT-200
    chain KMC e10 Sport EPT
    • 110x15mm width front hub
    • 32 spoke holes
    • Centerlock
    • 148x12mm width rear hub
    • 36 spoke holes
    • Centerlock
    • 20mm inner width
    • 11-42 teeth
    • 10 speed
    spokes Black stainless
    • 31.8mm diameter
    • 6° stem angle
    • 720mm width
    • 10mm rise
    headset MERIDA 2341 Neck
    • 30.9mm diameter
    • 15mm setback
    saddle MERIDA Comp CC

    weighed at medium size

    light front CG-119PG-BLACK(1)
    light rear CG-404RG-BLK
    Bike Frame Geometry Image
    Frame Size M L XL
    Tyre Sizes 29" 29" 29"
    Frame Size CM 43 48 53
    ST seat tube [mm] 430 480 530
    TT top tube [mm] 590 610 630
    CS chain stay length [mm] 458 458 458
    HTA head tube angle [°] 69.5 69.5 69.5
    STA seat tube angle [°] 73.5 73.5 73.5
    BD bottom bracked drop [mm] 65 65 65
    HT head tube [mm] 115 125 135
    FL fork length [mm] 511 511 511
    R reach [mm] 402 420 437
    S stack [mm] 634 643 652
    WB wheel base [mm] 1123 1143 1164
    SH stand over height [mm] 733 777 819
    No. Item-No. Name Info Pieces Torque NM
    1 SMART ENTRY
    2 SMART ENTRY
    3 2300011412 screw 1 4
    4 2161000670 Battery Cover for eBIG.SEVEN sizes XS / S for eBIG.NINE size M 1
    5 2161000681 Battery Cover for eBIG.SEVEN size M for eBIG.NINE sizes L / XL 1
    6 2300012101 Screw 3 16
    7 2300012112 Screw 3 16
    8 2258000217 Cable Guide 1
    9 2298002501 Screw 1 7
    10 2300010950 Screw 2 4
    11 2311005101 Dropout DH-057 1
    12 2300005272 Screw 1 43954

    HIGHLIGHTS

    HFS-hydroforming Prolite 66 triple butted aluminium hardtail frame with a sporty yet comfortable geometry. Size XS, S and M available in 650B, size M, L and XL available in 29er wheel size. ‘Smart Entry’ cable routing for rattle free running. E8000 and E7000 frame version come with casting motor bracket creating an integrated appearance of the motor into the frame as well as provides an extremely strong connection between frame and motor. Comes with integrated fixings for mudguards and side stand.

    100 mm up front offers lots of comfort while having plenty of reserves when you choose a more ‘off-road’ route home. Ultimately e-MTBs encourage the rider to go ‘off the beaten track’ whenever possible.

    The geometry of our eBIG.NINE follows one very simple principle: As sporty as possible, as comfortable as necessary. You ride to work in the morning but fancy a little off-road detour on the way home? No problem – that is what these bikes are made for!

    ‘K-mount’ featuring bikes have fixing points on the chain stays to fit a MERIDA kickstand while ‘C-mount’ equipped bikes have the fixing point for the rear rack (carrier) integrated. ‘F-mount’ equipped bikes have the fixing points for the mudguards (fenders) already integrated.

    The E8000 battery is perfectly integrated into the hydroformed down tube and delivers an impressive 500 Wh long detours home – the perfect aggregate for the new E7000 motor, which impresses commuters and sporty riders with its perfect balanced power delivery. However, for the more performance orientated rider we also offer a complete E8000 system.

    Dependent on frame size we offer 650B or 29er versions on our TFS and SPEED frame level. The requirements of smaller riders (reduced standover height, preferred lower cockpit) are best met by 650B on S and M frame sizes whilst at the other side of the spectrum, L and XL only come with 29er wheels. Size M is available in either 650B or 29er. 

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trail gets rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    Technologies

    IMAGE

    PROLITE 66 TRIPLE BUTTED ALUMINUM

    Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

    IMAGE

    HFS - HYDRO FORMING SYSTEM

    Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

    IMAGE

    X-TAPER HEADTUBE

    Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

    IMAGE

    SMOOTH WELDING

    Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

    IMAGE

    INTERNAL CABLE ROUTING

    Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

    IMAGE

    SMART ENTRY

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    IMAGE

    DI2 READY

    Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

    IMAGE

    F-MOUNT

    ‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

    IMAGE

    K-MOUNT

    Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

    IMAGE

    C-MOUNT

    ‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

    IMAGE

    CASTING MOTOR BRACKET

    Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.