• *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

    • material: carbon
    • 700x35C max. wheelsize
    • 100x12/ 142x12mm axle standard
    • BB86 bottom bracket standard
    frame size S, M, L
    • material: carbon
    • 700x35C max. wheelsize
    derailleur (f) Shimano Ultegra
    shifter front Shimano Ultegra disc
    shifter rear Shimano Ultegra disc
    brake lever Shimano Ultegra
    • 46-36 teeth
    • 170 mm-XS/S, 172.5 mm-M, 175 mm-L/XL
    chain KMC X11
    crank size 170 mm-XS/S, 172.5 mm-M, 175 mm-L/XL
    • 11-30 teeth
    • 11 speed
    • 700x33C
    • fold
    • Tubeless compatible
    • 700x33C
    • fold
    • Tubeless compatible
    • 100x12mm width front hub
    • 142x12mm width rear hub
    • 19mm inner width
    • 22mm height
    • Centerlock
    • material: aluminium
    • Tubeless ready (tubeless tape and valves not included)
    spokes attached
    • 31.8mm diameter
    • material: aluminium
    • -5° stem angle
    • 80 mm-XS/S, 90 mm-M/L, 100 mm-XL
    • material: aluminium
    • 380mm(XXS) , 400mm (XS-S) , 420mm (M) , 440mm (L-XL)
    headset VP-B303AC Neck
    • material: carbon
    • 27.2mm diameter
    • 15mm setback
    saddle MERIDA EXPERT CC + MERIDA Multitool with Saddlebox

    weighed with 700C wheels and at frame size M, without pedals

    Bike Frame Geometry Image
    Frame Size S M L
    Tyre Sizes 28" 28" 28"
    Frame Size CM 50 53 56
    ST seat tube [mm] 500 530 560
    TT top tube [mm] 535 550 565
    CS chain stay length [mm] 423 423 423
    HTA head tube angle [°] 71 71.8 72
    STA seat tube angle [°] 74 74 74
    BD bottom bracked drop [mm] 68 68 68
    HT head tube [mm] 109 125 144
    FL fork length [mm] 400 400 400
    R reach [mm] 382 392 401
    S stack [mm] 533 553 572
    WB wheel base [mm] 1013 1016 1029
    SH stand over height [mm] 747 774 802
    No. Item-No. Name Info Pieces Torque NM
    1 2300011412 SCREW 2 4
    4 2300013823 SCREW 1 5
    5 2300010983 SCREW 1 5
    6 2302002031 NUT 1
    7 2311004984 DROPOUT DH-054 1
    8 2143003387 RUBBER PLUG for Di2 version 1
    9 2143003376 RUBBER PLUG for mechanical version 1
    10 2030000310 BRIDGE needed for fender mount 1
    11 2300012479 SCREW 2 5
    12 2143003514 RUBBER PLUG 1
    13 2143003310 RUBBER PLUG


    Our new MISSION CX has managed to get an incredible amount of press since its launch date. Besides being awarded the 2019 Design & Innovation Award, it was also rated highly by BIKERUMOR, GRAN FONDO, Road.cc and IMB.

    All models are equipped with a full carbon tapered fork. Carbon has great vibration absorbing properties in addition to being lightweight, so ride quality is improved. The carbon tapered steerer provides great stiffness to the front end of the bike, delivering precise and confidence-inspiring handling.

    All models are equipped with disc brakes, providing high-performance braking isolated from the weather and gritty conditions due to their location at the wheel's hub/centre. They feature flat mount brake standard for a neat and flush positioning of the brake caliper. 

    The 12 mm bolt through axles for greater wheel stiffness and precise disc alignment when replacing wheels. The custom axle lever is removable and has a 4 mm Allen key included, so, for example, stem and seat post clamps can be tightened and loosened.

    All models have the ability to add mudguards, making them more versatile, particularly when used as a training or commuting bike. The removable seat stay bridge stays in place to securely hold the rear mudguard or gets removed for a cleaner look and improved mud clearance.

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trail gets rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.




    Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.



    Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.



    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.



    Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.



    To protect the integrity of carbon frames, the fibres are bonded together with an epoxy resin with added nano particles, increasing impact resistance by up to 40%.



    When creating the individual carbon elements, an inflatable bladder is used to ensure there are no wrinkles inside the tube as these can add weight and create weakness. This results in a lighter, stiffer and stronger frame.



    ‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.



    A removable seat stay bridge can be fitted for neater and more secure fitting of rear fenders, but removed for increased mud clearance and a cleaner look.