• *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

    • material: aluminium
    • 700C wheelsize
    • 142x12mm axle standard
    • external
    • max. 504 Wh
    • eSPRESSO L XS(43L)-S(47L)-M(51L)-L(55L)
    color ANTHRACITE (BLACK)
    • Coil
    • 63mm suspension travel
    • 700x48C max wheelsize
    display Shimano SC-E5000
    battery lock Abus Key
    shifter rear Shimano Altus rapidfire
    • 38 teeth
    • Shimano FC-E5010
    chain KMC e9S
    • 100x9mm width front hub
    • 32 spoke holes
    • Centerlock
    • 142x12mm width rear hub
    • 36 spoke holes
    • Centerlock
    • 20mm inner width
    • material: aluminium
    • 11-36 teeth
    • 9 speed
    • 622x42"
    • reflective stripe
    • 622x42"
    • reflective stripe
    spokes Black stainless
    • material: aluminium
    • 31.8mm diameter
    • 17° stem angle
    • 80 mm-XS/S, 90 mm-M, 100 mm-L, 110 mm-XL
    • material: aluminium
    • 660mm width
    • 15mm rise
    headset MERIDA 2346 Neck
    • material: aluminium
    • 30.9mm diameter
    • 15mm setback
    fender Sunnywheel SW-FA 513
    carrier MERIDA MIK Carrier with Spring clip & Herrmans rear light
    kickstand Massload CL-KA98

    weighed with 700C wheels and at frame size M

    light front Herrmans H-Black MR4 E
    light rear Herrmans H-Cargo integrated in MERIDA MIK carrier
    Bike Frame Geometry Image
    Frame Size XS S M L XL
    Tyre Sizes 28" 28" 28" 28" 28"
    Frame Size CM 43 47 51 55 59
    ST seat tube [mm] 430 470 510 550 590
    TT top tube [mm] 565 580 590 610 630
    CS chain stay length [mm] 475 475 475 475 475
    HTA head tube angle [°] 70.5 71 71 71.5 71.5
    STA seat tube angle [°] 74 73.5 73.5 73 73
    BD bottom bracked drop [mm] 70 70 70 70 70
    HT head tube [mm] 130 140 155 175 205
    FL fork length [mm] 477 477 477 477 477
    R reach [mm] 385 391 397 404 415
    S stack [mm] 627 638 653 674 702
    WB wheel base [mm] 1101 1105 1116 1124 1145
    SH stand over height [mm] 723 757 792 827 864
    No. Item-No. Name Info Pieces Torque NM
    1-5 SMART ENTRY
    6 2161000670 Battery Cover for sizes S / M / L / XL 1
    7 2161000681 Battery Cover for size XS 1
    8 2300012101 SCREW 3 16
    9 2300012112 SCREW 3 16
    10 2258004943 CABLE GUIDE 1
    11 2258000217 CABLE GUIDE 1
    12 2298002501 SCREW 1 7
    13 2300009458 SCREW 2 4
    14 2311005101 Dropout DH-057 1
    15 2143003213 BLIND PLUG if no carrier is mounted 2
    16 2298011131 SCREW if no carrier is mounted 2 8

    HIGHLIGHTS

    All models ride on fast-rolling 700c wheels, ideal for rides on roads, lanes and smooth tracks. We fit tyres with reflective sidewalls and puncture protection that will get you to your destination quickly and safely. However, our 'classic' eSPRESSO frames can also take 650B wheels if needed.

    In our eSPRESSO range, you can choose between two frame options. The frame design with integrated battery technology, or the proven semi-integrated battery frame option, so that you can find the ideal bike for your preferences and your budget. Our integrated battery models come equipped with either the super-powerful EP8 or the more economical E6100 motor, while the semi-integrated battery models feature the entry-level E5000 power unit, giving you even more choice to select the perfect eSPRESSO for your needs.

    All our eSPRESSO models come equipped with mudguards, lights, lock, rear rack and a kickstand, making them ready for anything from the moment you leave the store.

    The system weight of a bike is the combined weight of bike, rider and additional luggage. The allowed system weight is 140 kg. As an e-bike is already heavier than a regular bike, and as it also makes it easier to transport larger amounts of luggage, it is imperative to certify a higher overall system weight. All MERIDA e-bikes, as well as all used componentry, go through a rigorous and e-bike specific testing schedule which mimics the higher forces and strains to guarantee the rider the highest level of safety.

    We feature internal cable routing on all models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing, whilst the cables are protected from moisture and dirt and gives the bike a cleaner look.

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trail gets rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    Technologies

    IMAGE

    PROLITE 66 TRIPLE BUTTED ALUMINUM

    Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

    IMAGE

    HFS - HYDRO FORMING SYSTEM

    Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

    IMAGE

    X-TAPER HEADTUBE

    Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

    IMAGE

    SMOOTH WELDING

    Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

    IMAGE

    INTERNAL CABLE ROUTING

    Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

    IMAGE

    SMART ENTRY

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    IMAGE

    DI2 READY

    Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

    IMAGE

    F-MOUNT

    ‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

    IMAGE

    K-MOUNT

    Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

    IMAGE

    C-MOUNT

    ‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

    IMAGE

    CASTING MOTOR BRACKET

    Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.