• material: aluminium
  • 27.5 wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size XS, S, M, L
color GLOSSY TEAL (SILVER-GREEN/BLACK)
  • Coil
  • 100mm suspension travel
  • Lockout
  • 46mm fork offset
derailleur (r) Shimano Alivio
derailleur (f) Shimano M3000
shifter front Shimano Altus
shifter rear Shimano Altus
  • 40-30-22 teeth
  • 170 mm-XS, 175 mm-M up
chain KMC M99
crank size 170 mm-XS, 175 mm-M up
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
  • 20mm inner width
  • material: aluminium
  • 11-36 teeth
  • 9 speed
spokes Black stainless
  • material: aluminium
  • 31.8mm diameter
  • 15° stem angle
  • XS/S/M-80 mm, L-90 mm
  • material: aluminium
  • 660mm width
  • 25mm rise
headset MERIDA M44PSE neck
  • material: aluminium
  • 27.2mm diameter
  • 12mm setback
saddle MERIDA COMP CC

weighed at frame size S and 27.5" wheels without pedals

Bike Frame Geometry Image
Frame Size XS S M L
Frame Size CM 34 38 43 47
ST seat tube [mm] 343 381 432 470
TT top tube [mm] 550 560 575 585
CS chain stay length [mm] 430 430 430 430
HTA head tube angle [°] 69.5 69.5 70 70
STA seat tube angle [°] 74.5 74.5 74.5 74.5
BD bottom bracked drop [mm] 63 63 63 63
HT head tube [mm] 95 100 105 115
FL fork length [mm] 493 493 493 493
R reach [mm] 384 392 405 413
S stack [mm] 600 605 612 621
WB wheel base [mm] 1051 1062 1072 1083

Technologies

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.