• material: aluminium
  • 700C wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size L
  • Coil
  • 63mm suspension travel
derailleur (r) Shimano RD-M310
derailleur (f) Shimano FD-TY710
shifter front Shimano ST-EF500
brake lever Shimano ST-EF500
shifter rear Shimano ST-EF500
brake front Jak J8 disc
brake rear Jak J8 disc
  • 48-38-28 teeth
  • 170 mm-XXS/SM, 175 mm-ML/XXL
chain KMC M700
crank size 170 mm-XXS/SM, 175 mm-ML/XXL
  • 100x9mm width front hub
  • 32 spoke holes
  • 6 bolt
  • 135x9mm width rear hub
  • 32 spoke holes
  • 6 bolt
  • 17mm inner width
  • material: aluminium
  • 11-32 teeth
  • 8 speed
spokes Steel UCP
  • material: aluminium
  • 25.4mm diameter
  • adjustable
  • 100 mm all sizes
  • material: aluminium
  • 660mm width
  • 25mm rise
headset FSA TH888
  • 27.2mm diameter
  • 13mm setback
  • 40mm seatpost suspension travel
saddle MERIDA Cross Sport

weighed at frame size M-L without pedals

Bike Frame Geometry Image
Frame Size L
Tyre Sizes 28"
Frame Size CM 55
ST seat tube [mm] 550
TT top tube [mm] 605
CS chain stay length [mm] 450
HTA head tube angle [°] 72
STA seat tube angle [°] 73
BD bottom bracked drop [mm] 70
HT head tube [mm] 145
FL fork length [mm] 450
R reach [mm] 415
S stack [mm] 620
WB wheel base [mm] 1091
SH stand over height [mm] 798


Most CROSSWAY models are also available in a low step through frame, providing an opportunity to find the perfect fit without compromising on equipment and functionality.

6061 double butted and technoformed aluminium frame. Equipped with mounts for rack, mudguards and kickstand.

Our CROSSWAY models are equipped with suspension forks and suspension seat posts, on most models, to iron out any surface bumps. Adjustable ahead stems are also fitted (now including our SPEED models), providing an adjustable riding position for maximum sitting comfort on the bike. The exceptions are the sportier models that feature a regular seat post and stem.

All CROSSWAY 100 up to XT-EDITION models feature tyres with reflective strips on their sidewalls, improving visibility on the road.

Mudguards, racks and kickstands can be added to all CROSSWAY models, making them usable in many circumstances.




We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.



Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 



‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.



Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).



‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.