• material: aluminium
  • 700C wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size S, M, L, XL
  • Coil
  • 63mm suspension travel
  • Lockout
derailleur (r) Shimano Alivio
derailleur (f) Shimano M370
shifter front Shimano Altus
brake lever Shimano MT-200
shifter rear Shimano Altus
brake front Shimano MT-200
brake rear Shimano MT-200
  • 48-36-26 teeth
  • 170 mm-XXS/XS/S, 175 mm-M/XL
chain KMC M99
crank size 170 mm-XXS/XS/S, 175 mm-M/XL
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
  • 20mm inner width
  • 17mm height
  • material: aluminium
  • 11-34 teeth
  • 9 speed
  • 700x40C
  • wire
  • reflective stripe, Silkshild
  • 700x40C
  • wire
  • reflective stripe, Silkshild
spokes Black stainless
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 80 mm-XXS/XS/S, 90 mm-M/L, 100 mm-XL
  • material: aluminium
  • 660mm width
  • 25mm rise
headset MERIDA M2346 Neck
  • 30.9mm diameter
  • 10mm setback
  • 40mm seatpost suspension travel
saddle MERIDA Cross Sport

weighed at frame size M without pedals

Bike Frame Geometry Image
Frame Size S M L XL
Tyre Sizes 28" 28" 28" 28"
Frame Size CM 47 51 55 59
ST seat tube [mm] 470 510 550 590
TT top tube [mm] 580 590 610 630
CS chain stay length [mm] 460 460 460 460
HTA head tube angle [°] 71 71 71.5 71.5
STA seat tube angle [°] 73.5 73.5 73 73
BD bottom bracked drop [mm] 70 70 70 70
HT head tube [mm] 140 155 175 205
FL fork length [mm] 460 460 460 460
R reach [mm] 396 402 409 420
S stack [mm] 622 637 658 686
WB wheel base [mm] 1089 1100 1109 1130
SH stand over height [mm] 745 779 814 849
Body Height Cm 155 - 170 161 - 180 171 - 190 > 185


Most CROSSWAY models are also available in a low step through frame, providing an opportunity to find the perfect fit without compromising on equipment and functionality.

6061 double butted and technoformed aluminium frame with a concealed cable channel underneath. Tapered head tube for confidence inspiring handling. Graceful lines with smooth welding. Equipped with mounts for rack, mudguards and kickstand.

Our CROSSWAY models are equipped with suspension forks and suspension seat posts, on most models, to iron out any surface bumps. Adjustable ahead stems are also fitted (now including our SPEED models), providing an adjustable riding position for maximum sitting comfort on the bike. The exceptions are the sportier models that feature a regular seat post and stem.

All CROSSWAY 100 up to XT-EDITION models feature tyres with reflective strips on their sidewalls, improving visibility on the road.

Mudguards, racks and kickstands can be added to all CROSSWAY models, making them usable in many circumstances.




Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.



Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.



We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.



Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 



‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.



Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).



‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.