eSPRESSO TK 600 EQ

eSPRESSO TK 600 EQ

Color variants

eSPRESSO TK 600 EQ
  • *All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.

    • material: aluminium
    • 700C wheelsize
    • 135x9mm axle standard
    • external
    • max. 504 Wh
    frame size S, M, L
    color MATT BLACK/GLOSSY ANTHRACITE
    • Coil
    • 80mm suspension travel
    display Shimano SC-E6100
    battery lock Abus key
    derailleur (r) Shimano Deore Shadow+
    shifter rear Shimano Deore
    chain KMC e10S
    • 170 mm-S/M, 175 mm-L
    • 100x9mm width front hub
    • 32 spoke holes
    • Centerlock
    • 135x9mm width rear hub
    • 36 spoke holes
    • Centerlock
    • 20mm inner width
    • material: aluminium
    • 11-42 teeth
    • 10 speed
    • 27.5x2.2"
    • wire
    • reflecting line
    • 27.5x2.2"
    • wire
    • reflecting line
    spokes Black stainless
    • material: aluminium
    • 31.8mm diameter
    • adjustable
    • 90 mm-S/M, 110 mm-L
    • material: aluminium
    • 640mm width
    • 35mm rise
    headset MERIDA 2346 Neck
    • 30.9mm diameter
    • 15mm setback
    • 40mm seatpost suspension travel
    fender Sunnywheel SW-FA-311-65A(MSB)
    carrier RACKTIME RT MERIDA TK / CC
    kickstand CL-KA100

    weighed at frame size M without pedals

    light front Herrmans H-BLACK MR4 E
    light rear Herrmans H-Trace
    Bike Frame Geometry Image
    Frame Size S M L
    Tyre Sizes 27.5" 27.5" 27.5"
    Frame Size CM 43 48 53
    ST seat tube [mm] 430 480 530
    TT top tube [mm] 588 605 623
    CS chain stay length [mm] 445 445 445
    HTA head tube angle [°] 68.5 68.5 68.5
    STA seat tube angle [°] 73 73 73
    BD bottom bracked drop [mm] 50 50 50
    HT head tube [mm] 170 190 210
    FL fork length [mm] 484 484 484
    R reach [mm] 392 403 415
    S stack [mm] 642 661 680
    WB wheel base [mm] 1114 1133 1152
    SH stand over height [mm] 472 465 461
    No. Item-No. Name Info Pieces Torque NM
    1 2300011768 SCREW 2
    2 2258004222 CABLE GUIDE 1
    3 2258004211 CABLE GUIDE 1
    4 2258004943 CABLE GUIDE 1
    5 2311005167 DROPOUT DH-013F 1
    6 2300000772 SCREW 2 4
    7 2300013403 SCREW 3 16
    8 2300013414 SCREW 3 16
    9 2300011199 NUT 1 8
    10 2300013027 SCREW 1

    HIGHLIGHTS

    HFS-hydroforming Prolite 66 triple butted aluminium frame based around fast rolling yet durable 650B wheels and with commuting and leisure riding in mind. A higher front end and a compact geometry make for a more upright and extremely comfortable riding position. Battery positioned extra low for improved handling. Comes equipped with mudguards, rear rack, side stand, lock and lights.

    The eSPRESSO CC come fully equipped with fenders, kickstand, carrier and lights. Ready for any outing you can think of.

    A centrally positioned low centre of gravity, which has been achieved through the positioning of the battery in the lower position of the downtube as well as the location of the Shimano motors, enables to deliver fantastic riding characteristics in any situation which are extremely important in particular in wave low step through frames which have the tendency to chatter and jitter when power is applied.

    The decision to use 650B wheels with 2.25" off-road tread pattern for our CC models is not just a design feature but has more practical reasons. To add big volume tyres to an e-bike provides increased comfort but also extra traction and therefore more safety reserves. Small and even bigger bumps can easily be rolled over, and a big volume tyre provides more puncture protection compared to a narrow one.

    We feature internal cable routing on all models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing, whilst the cables are protected from moisture and dirt and gives the bike a cleaner look.

    The outstanding frame stiffness has a strong influence on the riding characteristics of wave low step through frames. The tapered head tube, the large tube diameters, the forged motor bracket as well as the 142x12 mm through rear axle all contribute to achieve a safe and precise riding experience. 

    The Shimano mid-mounted motor, in combination with the forged motor bracket provides one of the lowest step-through heights in the market.

    Technologies

    IMAGE

    PROLITE 66 TRIPLE BUTTED ALUMINUM

    Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

    IMAGE

    HFS - HYDRO FORMING SYSTEM

    Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

    IMAGE

    X-TAPER HEADTUBE

    Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

    IMAGE

    SMOOTH WELDING

    Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

    IMAGE

    INTERNAL CABLE ROUTING

    Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

    IMAGE

    DI2 READY

    Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

    IMAGE

    F-MOUNT

    ‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

    IMAGE

    K-MOUNT

    Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

    IMAGE

    C-MOUNT

    ‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.