eONE-SIXTY LIMITED-EDITION

eONE-SIXTY LIMITED-EDITION
eONE-SIXTY LIMITED-EDITION

Color variants

eONE-SIXTY LIMITED-EDITION

Awards & Media

  • material: aluminium
frame size XS, S, M, L, XL
color GLOSSY GREEN/MATT BLACK
display Shimano SC-E7000
battery lock lock for Shimano integrated battery, no key use allen key
derailleur (r) Shimano XT RDM8100 Shadow+
shifter rear Shimano SLX 12
chain CN-M7100
  • 110x15mm width front hub
  • 148x12mm width rear hub
  • 29mm inner width
spokes Black stainless
  • material: aluminium
headset Merida 1901
saddle MERIDA COMP CC
fender C093-02F + C093-02R
Bike Frame Geometry Image
Frame Size XS S M L XL
Tyre Sizes 29/27.5" 29/27.5" 29/27.5" 29/27.5" 29/27.5"
Frame Size CM 41 42 44 47 50
ST seat tube [mm] 405 420 440 470 500
TT top tube [mm] 563 584 605 629 652
CS chain stay length [mm] 439.5 439.5 439.5 439.5 439.5
HTA head tube angle [°] 65.5 65.5 65.5 65.5 65.5
STA seat tube angle [°] 75.5 75.5 75.5 75.5 75.5
BD bottom bracked drop [mm] 17.5 17.5 17.5 17.5 17.5
HT head tube [mm] 110 115 120 135 150
FL fork length [mm] 571 571 571 571 571
R reach [mm] 400 420 440 460 480
S stack [mm] 629 633 638 652 665
WB wheel base [mm] 1168 1190 1212 1238.5 1264.5
SH stand over height [mm] 737 736 734 755 777

CATEGORY HIGHLIGHTS

HFS-hydroformed Racelite 61 double butted aluminium frame featuring internal battery technology and an aggressive enduro geometry with 160 mm rear wheel travel. Shimano STePS motor allows for short chain stays delivering agility. ‘Smart Entry’ cable routing for rattle free running. Casting motor bracket
creates an integrated appearance of the motor into the frame as well as provides an extremely strong connection between frame and motor.

A two-component battery cover, which offers the perfect protection for the internal battery of these models. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape.

First introduced in 2015, the e-bike version of the 'Internal Block' is incorporated directly into the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

The eONE-SIXTY features a perfectly positioned satellite on/off switch, at the head tube end of the top tube, and a well-protected satellite charging port, positioned in the main frame triangle, just above the motor.

To give the e-full suspension bikes precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5" tyre and a 650B rear wheel, equipped with a slightly wider 2.6" tyre. The perfect combination of precision, playfulness and traction.

Specifically located openings on the carbon models near the head tube which work like a chimney and allow the warm air to dissipate to guarantee the optimum operating temperature of the internal battery. The 'Thermo Gate' enables the battery to perform at its best, in any condition.

Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.

‘Boost’ standard front & rear. The extra 6 mm rear hub and 10 mm front hub spacing in comparison with conventional hubs brings the width up to 148 mm / 110 mm and gives the eONE-SIXTY wheels noticeably more stiffness and strength.

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

IMAGE

ENERGY GUARD

A two-component battery cover, which offers perfect protection for the internal battery. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape. All critical parts like the rubber strap and o-rings for perfect fitting can be replaced.