• material: aluminium
  • 700C wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size XS, S, M
color MATT WHITE (GREY)
  • Coil
  • 63mm suspension travel
  • Lockout
derailleur (r) Shimano Alivio
derailleur (f) Shimano M370
shifter front Shimano Altus
brake lever Shimano MT-200
shifter rear Shimano Altus
brake front Shimano MT-200
brake rear Shimano MT-200
  • 48-36-26 teeth
  • 170 mm-XS/S, 175 mm-M/XL
chain KMC M99
crank size 170 mm-XS/S, 175 mm-M/XL
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
  • 20mm inner width
  • 17mm height
  • material: aluminium
  • 11-34 teeth
  • 9 speed
  • 700x40C
  • wire
  • reflective stripe, Silkshild
  • 700x40C
  • wire
  • reflective stripe, Silkshild
spokes Black stainless
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 80 mm-XXS/XS/S, 90 mm-M/L, 100 mm-XL
  • material: aluminium
  • 660mm width
  • 25mm rise
headset MERIDA M2346 Neck
  • 30.9mm diameter
  • 10mm setback
  • 40mm seatpost suspension travel
saddle MERIDA Cross Sport

weighed at frame size S without pedals

Bike Frame Geometry Image
Frame Size XS S M
Tire Sizes 28" 28" 28"
Frame Size CM 43 47 51
ST seat tube [mm] 430 470 510
TT top tube [mm] 565 580 590
CS chain stay length [mm] 460 460 460
HTA head tube angle [°] 70.5 71 71
STA seat tube angle [°] 74 73.5 73.5
BD bottom bracked drop [mm] 70 70 70
HT head tube [mm] 130 140 155
FL fork length [mm] 460 460 460
R reach [mm] 390 396 402
S stack [mm] 611 622 637
WB wheel base [mm] 1085 1089 1100
SH stand over height [mm] 650 650 651
Body Height Cm 145 - 160 155 - 170 161 - 180

Technologies

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.