*All specifications listed are subject to change without notice. *Recommended Retail Prices are subject to change without notice.
Awards & Media
- 4 piston
- material: carbon
- 150mm suspension travel
- 27.5x2.8" max. wheelsize
- 148x12mm axle standard
- max. 630 Wh
- 160mm suspension travel
- 51mm fork offset
- 29x2.6" max wheelsize
- 4 piston
- 4 piston
- 34 teeth
- Shimano FCEM900
- 165 mm all sizes
- 10-51 teeth
- 12 speed
- 29x2.5 "
- TR DD 3C MaxxGrip
- TR DD Dual
- 110x15mm width front hub
- 148x12mm width rear hub
- 30mm inner width
- material: carbon
- Tubeless ready (tubeless tape and valves included)
- material: aluminium
- 35mm diameter
- 0° stem angle
- GoPro & Supernova mount
- 40 mm all sizes
- 780mm width
- 20mm rise
- 30.9mm diameter
- 0mm setback
- XS 125mm travel seatpost - S/M 150mm travel seatpost - L/XL 170mm travel seatpost
weighed with 29" wheels and at frame size M, without pedals, incl. lights
|ST seat tube [mm]||405||420||440||470||500|
|TT top tube [mm]||563||584||605||629||652|
|CS chain stay length [mm]||439.5||439.5||439.5||439.5||439.5|
|HTA head tube angle [°]||65.5||65.5||65.5||65.5||65.5|
|STA seat tube angle [°]||75.5||75.5||75.5||75.5||75.5|
|BD bottom bracked drop [mm]||17.5||17.5||17.5||17.5||17.5|
|HT head tube [mm]||110||115||120||135||150|
|FL fork length [mm]||571||571||571||571||571|
|R reach [mm]||400||420||440||460||480|
|S stack [mm]||628.5||633||637.5||651.5||665|
|WB wheel base [mm]||1168||1190||1212||1238.5||1265|
|SH stand over height [mm]||742||737||733||740||754|
|1||A2294000162||WASHER||OD21.1mm ID15.1mm H3mm||2|
|2||A2221000043||BEARING||3802V-2RS OD24mm ID15mm W7mm||2|
|3||A2300000263||BOLT||M10x1 OD15mm L64mm||1|
|6||A2300000356||BOLT||M6x1 OD10mm L51.5mm||1|
|8||A2221000034||BEARING||6800V-2RS OD19mm ID10mm W5mm||2|
|10||A2294000093||WASHER||OD15mm ID10.1mm H3mm||2|
|11||A2221000035||BEARING||6801V-2RS OD21mm ID12mm W5mm||2|
|13||A2300000265||BOLT||M8x0.75 OD12mm L68mm||1|
|14||A2294000023||WASHER||OD15mm ID12mm H3mm||2|
|15||A2294000099||WASHER||OD17.5mm ID12.1mm H2mm||4|
|16||A2221000039||BEARING||12214V-2RS OD21mm ID12mm W4mm||8|
|SMALL PARTS||see pdf file|
Comes equipped with the new EP8 motor from Shimano STePS. It offers an increased performance of 85 Nm, less weight, a further reduction in size and less friction. On top of that, the new internal battery offers an extended range and super-fast charging capabilities.
First introduced in 2015, the e-bike version of the 'Internal Block' is incorporated directly into the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.
The eONE-SIXTY features a perfectly positioned satellite on/off switch, at the head tube end of the top tube, and a well-protected satellite charging port, positioned in the main frame triangle, just above the motor.
To give the e-full suspension bikes precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5" tyre and a 650B rear wheel, equipped with a slightly wider 2.6" tyre. The perfect combination of precision, playfulness and traction.
Specifically located openings on the carbon models near the head tube which work like a chimney and allow the warm air to dissipate to guarantee the optimum operating temperature of the internal battery. The 'Thermo Gate' enables the battery to perform at its best, in any condition.
Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.
These models are available in two different frame options. A carbon front end combined with a 6061 aluminium rear end, or a more budget-friendly all-aluminium chassis.