eSILEX+ 600

Reviews & Awards

  • material: aluminium
  • 700x45C / 700x42C (with fender) / 27,5x47C max. wheelsize
  • 100x9/135x9mm axle standard
  • BSA bottom bracket standard
frame size XS, S, M, L, XL
  • Tapered
  • material: carbon
  • 700x42C max/ 700x35C (with fender) max 50mm for 650B max wheelsize
speed sensor MAHLE PAS Sensor
  • 19mm inner width
  • 24mm height
  • material: aluminium
  • Tubeless ready (tubeless tape and valves not included)
  • 100x12mm width front hub
  • 28 spoke holes
  • Centerlock
  • Terra Trail, 650Bx47
  • ShieldWall
  • Terra Trail, 650Bx47
  • ShieldWall
Hubs MERIDA EXPERT SL
  • 40 teeth
  • 170 mm-XS/S/SM/ML, 175 mm-L/XL
crank size 170 mm-XS/S/SM/ML, 175 mm-L/XL
bottom bracket Shimano BSA
  • 11-42 teeth
  • 11 speed
chain KMC e11s
rear derailleur Shimano GRX812
headset VP-MH-P16
  • material: aluminium
  • 31.8mm diameter
  • 5° stem angle
  • 80 mm all sizes
stem size 80 mm all sizes
  • material: aluminium
  • 400mm (XS/S), 420mm (M), 440mm (L/XL)
grip MERIDA ROAD EXPERT
  • material: carbon
  • 30.9mm diameter
  • 0mm setback
seat clamp MERIDA EXPERT
lights CG-119PG-BLACK(1) / CG-404RG-BLK
pedal VP VPE-891

weighed with 700C wheels and at frame size M, without pedals

Bike Frame Geometry Image
Frame Size XS S M L XL
Tyre Sizes 27.5" 27.5" 27.5" 27.5" 27.5"
Frame Size cm 47 49 51 53 56
St Seat Tubes mm 470 490 510 530 560
Tt Top Tubes mm 525 540 555 570 585
Cs Chain Stays mm 431 431 431 431 431
HTA head tube angle [°] 69.5 70 70.5 71 71.5
STA seat tube angle [°] 75 75 75 75 75
Bd Bottom Bracket Drops mm 70 70 70 70 70
Ht Head Tube Lengths mm 145 160 175 190 205
Fl Fork Lengths mm 400 400 400 400 400
R Reach mm 374 384 395 406 416
S Stacks mm 565 581 597 613 629
Wb Wheel Base mm 1032 1044 1055 1066 1076
Sh Stand Over Height mm 748 767 785 804 830

CATEGORY HIGHLIGHTS

Higher system weights and increased cornering speeds demand precise steering. Our 1 1/2" oversized head tube, combined with a tapered fork, deliver exactly that, giving the rider the confidence to push into the next corner that little bit harder.

Our e700C LITE frame comes with multiple fixing points, allowing for fenders, rear rack and a kick stand to be fitted. This makes all three models very adaptable in case you want to turn your sporty e-road bike into a fast commuter or touring bike. The eSPEEDER 400 EQ comes fully kitted out as standard – ready for the daily commuting duties.

Depending on your preferences or the terrain you are going to ride on, you can fit 700c wheels with up to 40 mm tyres, even when fenders are fitted. If you prefer 650B wheels, then up to 47 mm wide off-road biased tyres are no problem.

The rear hub MAHLE motor system X35+offers 40 Nm of smooth and drag-free support and is powered by a 250 Wh internal battery. The system is controlled by a one-button iWOC switch which is positioned on the top tube. Different colours of the switch indicate the support as well as the battery level.

Should the 250 Wh battery not be enough, or you are intending to go for an extra long outing, then you can fit a 250 Wh range extender. The range extender can be attached to one of the bottle cage fixing points and plugs straight into the system for immediate range extension.

All cables are run internally, to give the bike a neat look as well as protect them from moisture and dirt. On our e-road bikes, we go one step further by letting all cables enter the frame through a specific headset cup, making the cockpit super clean and clutter-free.

HFS-hydroforming Prolite 66 triple butted aluminium frame with internal 250 Wh battery technology. Comfort orientated geometry and usable with 700c or 650B wheels. Tyre clearance of up to 40 mm with fenders (700c). Fixing points for mudguards, rear rack and kickstand.

All models are equipped with a full carbon tapered fork. Carbon has great vibration absorbing properties in addition to being lightweight, so ride quality is improved. The carbon tapered steerer provides great stiffness to the front end of the bike, delivering precise and confidence-inspiring handling.

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

IMAGE

WIRE PORT

MERIDA designed headsets that allow all control cables to enter the frame through the headset, creating a clean and uncluttered look, without making structural changes to the frame. Depending on the model, the cables are run completely internally (including bar and stem) or semi-integrated where the cables enter the frame underneath the stem.