eSCULTURA 400

eSCULTURA 400

 

Contact Local Shop
  • material: aluminium
  • 700x45C / 700x42C (with fender) / 27,5x47C max. wheelsize
  • 100x9/135x9mm axle standard
  • BSA bottom bracket standard
frame size XS, S, M, L, XL
  • material: carbon
  • 700x42C with fender
speed sensor MAHLE PAS Sensor
  • 17mm inner width
  • 22mm height aluminium
  • Tubeless ready (tubeless tape and valves not included)
  • 100x12mm width front hub
  • 28 spoke holes
  • Centerlock
Hubs MERIDA EXPERT SL
  • 50-34 teeth
  • 170 mm-XS/S/SM/ML, 175 mm-L/XL
crank 170 mm-XS/S/SM/ML, 175 mm-L/XL
bottom bracket Shimano BSA
  • 11-32 teeth
  • 11 speed
chain KMC e11s
front derailleur Shimano 105
headset VP-MH-P16
  • material: aluminium
  • 31.8mm diameter
  • 5° stem angle
  • 80 mm-XXS/XS, 90 mm-S, 100 mm-SM/ML, 110 mm-L/XL
stem size 80 mm-XXS/XS, 90 mm-S, 100 mm-SM/ML, 110 mm-L/XL
  • material: aluminium
  • 400mm (XS/S), 420mm (M/L), 440 (XL)
grip MERIDA ROAD EXPERT
  • material: carbon
  • 30.9mm diameter
  • 0mm setback
seat clamp MERIDA EXPERT
lights CG-119PG-BLACK(1) / CG-404RG-BLK
pedal VP VPE-891

weighed with 700C wheels and at frame size M, without pedals

Bike Frame Geometry Image
Frame Size XS S M L XL
Tyre Sizes 28" 28" 28" 28" 28"
St Seat Tubes mm 470 490 510 530 560
Tt Top Tubes mm 525 540 555 570 585
Cs Chain Stays mm 431 431 431 431 431
HTA head tube angle [°] 69.5 70 70.5 71 71.5
STA seat tube angle [°] 75 75 75 75 75
Bd Bottom Bracket Drops mm 70 70 70 70 70
Ht Head Tube Lengths mm 145 160 175 190 205
Fl Fork Lengths mm 400 400 400 400 400
R Reach mm 374 384 395 406 416
S Stacks mm 565 581 597 613 629
Wb Wheel Base mm 1032 1044 1055 1066 1076
Sh Stand Over Height mm 748 767 785 804 830
No. Item-No. Name Info Pieces Torque NM
1 A2136000017 MOUNT for bottle cage 1
2 A2298000185 SCREW M5x0.8 L10mm 2 3~5
3 A2298000145 SCREW M5x0.8 L20mm 1 3~5
4 A2311000120 RD-HANGER DH-074 for MTB-RD 1
4 A2311000119 RD-HANGER DH-072 for ROAD-RD 1
5 A2300000004 SCREW M3x0.5 L6mm 2 2~4
6 A2029000079 TUBE woven; L620mm for size XL 2
6 A2029000078 TUBE woven; L600mm for size M/L 2
6 A2029000077 TUBE woven; L580mm for size XS/S 2
7 A2161000122 COVER 1
8 A2298000069 SCREW M5x0.8 L12mm with washer 10 3~5
9 A2258000162 CABLE GUIDE for M5 fixation 1
10 A2298000119 SCREW M5x0.8 L10mm 6 3~5
11 A2258000163 CABLE GUIDE for M6 fixation 1
12 A2298000230 SCREW M6x1 L14mm with washer 1 3~5
13 A21610000211 CABLE GUIDE for headtube 1
14 A2191000185 HEAD SET MERIDA/VP-8158 (MH-P16/MH-P16) 1
15 A2350000962 FORK for eSILEX LITE 1
15 A2350001347 FORK for eSPEEDER LITE/eScultura LITE 1
16 A2002000114 THRU AXLE  COMP TR; L=121mm M12x1.5 TL=12mm 1
17 A2300000362 SCREW M4x0.7 L4mm 3 2~4
18 A2300000499 SCREW M5x0.8 L10mm 3 4~6
19 A2054000107 EXPANDER for fork steerer ID 23.6mm 1 6~8
20 A2029000062 TUBE woven; L170mm for size XL 1
20 A2029000061 TUBE woven; L150mm for size L 1
20 A2029000060 TUBE woven; L125mm for size S/M 1
20 A2029000059 TUBE woven; L105mm for size XS 1

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

 

HIGHLIGHTS

Higher system weights and increased cornering speeds demand precise steering. Our 1 1/2" oversized head tube, combined with a tapered fork, deliver exactly that, giving the rider the confidence to push into the next corner that little bit harder.

Our e700C LITE frame comes with multiple fixing points, allowing for fenders, rear rack and a kick stand to be fitted. This makes all three models very adaptable in case you want to turn your sporty e-road bike into a fast commuter or touring bike. The eSPEEDER 400 EQ comes fully kitted out as standard – ready for the daily commuting duties.

Depending on your preferences or the terrain you are going to ride on, you can fit 700c wheels with up to 40 mm tyres, even when fenders are fitted. If you prefer 650B wheels, then up to 47 mm wide off-road biased tyres are no problem.

The rear hub MAHLE motor system X35+offers 40 Nm of smooth and drag-free support and is powered by a 250 Wh internal battery. The system is controlled by a one-button iWOC switch which is positioned on the top tube. Different colours of the switch indicate the support as well as the battery level.

Should the 250 Wh battery not be enough, or you are intending to go for an extra long outing, then you can fit a 250 Wh range extender. The range extender can be attached to one of the bottle cage fixing points and plugs straight into the system for immediate range extension.

All cables are run internally, to give the bike a neat look as well as protect them from moisture and dirt. On our e-road bikes, we go one step further by letting all cables enter the frame through a specific headset cup, making the cockpit super clean and clutter-free.

All models are equipped with a full carbon tapered fork. Carbon has great vibration absorbing properties in addition to being lightweight, so ride quality is improved. The carbon tapered steerer provides great stiffness to the front end of the bike, delivering precise and confidence-inspiring handling.

Technology

IMAGE
Back to overview

PROLITE 66 TRIPLE BUTTED ALUMINUM

When creating high-end aluminium frames, we use our proven PROLITE 66 (6066) aluminium, as it is incredibly light and durable. In addition, it works exceptionally well with our hydroforming technology, allowing us to create complex shapes, featuring triple butted wall thicknesses, an almost carbon-like appearance and the best possible stiffness-to-weight ratio. While lesser alloys might be cheaper, it is the ideal choice for high-performance bicycle frames.

Watch Video
IMAGE
Back to overview

HFS - HYDRO FORMING SYSTEM

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

DOWN TUBE EXIT

DOWN TUBE EXIT is a feature seen on some of our frames with internally routed cables. By slightly overlapping the downtube where it connects to the bottom bracket, it leaves a small space that allows cables to exit easily. This means they are easily accessible for routine maintenance or replacement, but it prevents excessive movement and noise that can cause wear and distraction.

Watch Video
IMAGE
Back to overview

F-MOUNT

Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of our bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

Watch Video
IMAGE
Back to overview

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

Watch Video
IMAGE
Back to overview

C-MOUNT

Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

Watch Video
IMAGE
Back to overview

WIRE PORT

All control cables like gear, brake and dropper post cable enter the frame through a specifically shaped headset cap, cleaning up the cockpit area while also keeping them out of harm's way. Only the internally routed cable for the rear shock lockout enters the frame directly into the top tube for extra smooth lockout action.

Watch Video