eONE-FORTY 700

Frame Size	S	M	L	XL	XXL
Tyre Sizes	29/27.5"	29/27.5"	29/27.5"	29/27.5"	29/27.5"
Frame Size cm	41	42	43	45	47
St Seat Tubes mm	405	415	430	450	470
Tt Top Tubes mm	561	581	603	624	645
Cs Chain Stays mm	439.5	439.5	439.5	439.5	439.5
HTA head tube angle [°]	66.5	66.5	66.5	66.5	66.5
STA seat tube angle [°]	76.5	76.5	76.5	76.5	76.5
Bd Bottom Bracket Drops mm	25	25	25	25	25
Ht Head Tube Lengths mm	110	115	120	125	130
Fl Fork Lengths mm	551	551	551	551	551
R Reach mm	410	430	450	469	489
S Stacks mm	622	627	631	635	640
Wb Wheel Base mm	1160	1182	1204	1226	1248
Sh Stand Over Height mm	729	730	727	733	747

HIGHLIGHTS

SHIMANO'S EP8

Comes equipped with the new EP8 motor from Shimano STePS. It offers an increased performance of 85 Nm, less weight, a further reduction in size and less friction. On top of that, the new internal battery offers an extended range and super-fast charging capabilities.

INTERNAL BLOCK

First introduced in 2015, the e-bike version of the 'Internal Block' is incorporated directly into the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

CLEVER WHEELS

To give the e-full suspension bikes precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5" tyre and a 650B rear wheel, equipped with a slightly wider 2.6" tyre. The perfect combination of precision, playfulness and traction.

WATER CARRIER

Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.

CARBON OR ALUMINIUM

These models are available in two different frame options. A carbon front end combined with a 6061 aluminium rear end, or a more budget-friendly all-aluminium chassis.

Technology

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

INTERNAL BLOCK

First introduced in our 2015 NINETY-SIX, the new version of the 'Internal Block' is incorporated directly in the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

ENERGY GUARD TWIST

Twist lock mechanism that is located at the top end of the 'Energy Guard' battery cover, for easy locking and unlocking of the protective internal battery cover.

WATCH VIDEO ON YOUTUBE

eONE-FORTY 700

HIGHLIGHTS

Technology

HFS - HYDRO FORMING SYSTEM

X-TAPER HEADTUBE

SMOOTH WELDING

INTERNAL CABLE ROUTING

SMART ENTRY

DI2 READY

RACELITE 61 ALUMINIUM

K-MOUNT

CASTING MOTOR BRACKET

INTERNAL BLOCK

ENERGY GUARD TWIST

eONE-FORTY COLLECTION

ONLY DOWNHILL-FUN IS SO YESTERDAY