• material: aluminium
  • 133mm suspension travel
  • 27.5x2.8" max. wheelsize
  • 148x12mm axle standard
  • intube
  • max. 630 Wh
frame size M, L, XL, XXL
  • Air Boost
  • 140mm
  • Tapered
  • 51mm fork offset
  • 29x2.4" max wheelsize
battery Shimano E8036 630Wh / E8035 504Wh S
display Shimano SC-E5003
speed sensor Shimano EW-SS301
  • 29mm inner width
  • material: aluminium
  • Tubeless ready (tubeless tape and valves not included)
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 29x2.4"
  • wire
  • DUAL
  • 27.5x2.6"
  • wire
  • EXO
  • including removeable lever, 6/4mm allen key
  • 34 teeth
  • Shimano FCEM600
  • 165 mm for all sizes
bottom bracket included
  • 11-46 teeth
  • 10 speed
chain CNHG54
shifters Shimano SL -MT500-L clamp band / Shimano Deore M4100-RC1 clamp band 10
rear derailleur Shimano Deore RDM5120 10
  • 4 piston
  • 2 piston
headset MERIDA-8152
  • material: aluminium
  • 35mm diameter
  • 0° stem angle
  • GoPro & Supernova mount
  • 50 mm all sizes
stem size 50 mm all sizes
  • 780mm width
  • 20mm rise
grip MERIDA EXPERT EC
  • 30.9mm diameter
  • 0mm setback
  • S 100mm travel seatpost - M/L 125mm travel seatpost - XL 150mm travel seatpost
seat clamp MERIDA EXPERT clamp
lights CG-119PG-BLACK(1) / CG-404RG-BLK
mudguard C093-02F + C093-02R
pedal VP VPE-537

weighed with 29" wheels and at frame size M, without pedals, incl. lights

Bike Frame Geometry Image
Frame Size M L XL XXL
Tyre Sizes 29/27.5" 29/27.5" 29/27.5" 29/27.5"
Frame Size cm 42 43 45 47
St Seat Tubes mm 415 430 450 470
Tt Top Tubes mm 581 603 624 645
Cs Chain Stays mm 439.5 439.5 439.5 439.5
HTA head tube angle [°] 66.5 66.5 66.5 66.5
STA seat tube angle [°] 76.5 76.5 76.5 76.5
Bd Bottom Bracket Drops mm 25 25 25 25
Ht Head Tube Lengths mm 115 120 125 130
Fl Fork Lengths mm 551 551 551 551
R Reach mm 430 450 469 489
S Stacks mm 627 631 635 640
Wb Wheel Base mm 1182 1204 1226 1248
Sh Stand Over Height mm 730 727 733 747

CATEGORY HIGHLIGHTS

Comes equipped with the new EP8 motor from Shimano STePS. It offers an increased performance of 85 Nm, less weight, a further reduction in size and less friction. On top of that, the new internal battery offers an extended range and super-fast charging capabilities.

First introduced in 2015, the e-bike version of the 'Internal Block' is incorporated directly into the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

To give the e-full suspension bikes precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5" tyre and a 650B rear wheel, equipped with a slightly wider 2.6" tyre. The perfect combination of precision, playfulness and traction.

Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.

These models are available in two different frame options. A carbon front end combined with a 6061 aluminium rear end, or a more budget-friendly all-aluminium chassis.

Technology

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

IMAGE

INTERNAL BLOCK

First introduced in our 2015 NINETY-SIX, the new version of the 'Internal Block' is incorporated directly in the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

IMAGE

ENERGY GUARD TWIST

Twist lock mechanism that is located at the top end of the 'Energy Guard' battery cover, for easy locking and unlocking of the protective internal battery cover.